*********************************************

Broadcom MegaRAID StorCLI Release 

*********************************************

Supported Controllers
==================

MegaRAID SAS 9580-8i8e
MegaRAID SAS 9560-16i
MegaRAID SAS 9560-8i
MegaRAID SAS 9480-8i8e
MegaRAID SAS 9460-8i
MegaRAID SAS 9460-16i
MegaRAID SAS 9440-8i
MegaRAID SAS 9361-16i
MegaRAID SAS 9361-8i
MegaRAID SAS 9361-4i
MegaRAID SAS 9341-8i
MegaRAID SAS 9341-4i
MegaRAID SAS 9380-8e
MegaRAID SAS 9380-4i4e
MegaRAID SAS 9380-8i8e
MegaRAID SAS 9361-24i




Component:
=========
SAS MegaRAID StorCLI
Release Date: 8/5/22


Version Numbers:	StorCLI
===============		===========
Current Version		007.2203.0000.0000		
Previous Version	007.2106.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================



Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.




=======================
Previous Releases
=======================

Component:
=========
SAS MegaRAID StorCLI
Release Date: 5/18/22


Version Numbers:	StorCLI
===============		===========
Current Version		007.2106.0000.0000		
Previous Version	007.2007.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG01101870	OS drive name shown as N/A for multiple VDs
DCSG01103012	Storclif reports BBU instead of cachevault for failed retention tests
DCSG01077912	CLI not iterating through MR_SAS_CONNECTORS for controllers
DCSG01130834	Storcli 7.2005 can't start retention test, says No CacheVault Found!
DCSG01099892	Spellling of mismatch is displayed as "Missmatch" in "Encryption type missmatch" error message.
DCSG01132049	Erroris seen while flashing psoc.rom in cli.efi
DCSG01092478	Handling of VD target-ID's individually even when target-ID is assigned beyond maxLDs
DCSG01109962	Storcli- Device Type for Backplane in Alilog shown as Enclosure
DCSG01124998	Copyright shows as year 2021 instead of 2022 & also build release year shows as 2021 instead of 2022
DCSG01091959	Aero 9560/9580 - Add PSOC6 as Vision Controller
DCSG01140854	StorcLI-Controller status shown "Unknown" when predictive failure drives are present
DCSG01151036	Storcli shows Protection Information (PI) capable drive i.e. "PI eligible" as No, however LSA shows it properly
DCSG01065936	Removing the Logging Mechanism while decreasing the feature from UniKey
DCSG01073182	Support Sanitize Overwrite  operations on PDs
DCSG00952753	Need to clear both preferred boot device entry and Current entries when "set bootdrive=off"
DCSG00966715	Support Sanitize Overwrite  operations on PDs
DCSG01091954	Need to change the attribute name "Secured" to "Locked" in PD Properties output
DCSG00950284	storcli: Drive Connector name sorting
DCSG01026282	Change in how StorCLI reports PD count
DCSG01043616	Windows Client Win11 OS Support - MR6.14, SAS3 Phase 16,  MR 7.20, SAS3.5 Phase 22 (OS GCA Date - 10/05/2021)
DCSG00992333	Aero-Margay Connectivity Solution Integration
DCSG01110884	Storcli: 0 byte CSR files from Storcli with export command when slot is already configured
DCSG01101780	Storcli: Set Patrolread command hangs while setting "excludevd"
DCSG01081693	storcli 7.2102 has a minor cosmetic issue in reporting a device does not support a specific sanitize type.
DCSG01101771	StorCLI does not work if given absolute path in Esxi7.0u2
DCSG01071250	Storcli 7.2101 reports wrong slot numbering in Enc show Status command on SC Jbof.
DCSG01087440	PH22 Alpha - StorCLI - Add lane specific commands in IT help
DCSG01083763	PD Firmware Release Number = N/A is displayed for drive which has valid Firmware Release Number.
DCSG01081668	MR 7.21 PA1, Storcli 7.2102 reports Sanitize is not supported on this controller while sanitize is running.



Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.




Component:
=========
SAS MegaRAID StorCLI
Release Date: 5/23/21


Version Numbers:	StorCLI
===============		===========
Current Version		007.2007.0000.0000		
Previous Version	007.1907.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG01024693	Enclosure logical ID field is not displayed for BP connected to controller.
DCSG01102890	Storcli: Set Patrolread command hangs while setting "excludevd"
DCSG01050540	Strocli.efi utility got hung on issuing "storcli /c0 show" command
DCSG01040785	Need to change the attribute name "Secured" to "Locked" in PERCCLI PD Properties output
DCSG01040583	"storcli /call show" shows jumbled and duplicate devices 
DCSG01083800	PD Firmware Release Number = N/A is displayed for drive which has valid Firmware Release Number.
DCSG01024694	Storcli shows success without proper description for "VD delete BBMT" command when no VD present.
DCSG01036901	Storcli: While trying to import foreign config, Storcli is not showing any drive if user has "Dedicated Hotspare" & also DHS is not displaying along with VD as well
DCSG01092477	Handling of VD target-ID's individually even when target-ID is assigned beyond maxLDs
DCSG01068906	Windows Client Win11 OS Support - MR6.14, SAS3 Phase 16,  MR 7.20, SAS3.5 Phase 22 (OS GCA Date - 10/05/2021)
DCSG01029835	Storcli: While trying to import foreign config, Storcli is not showing drive as "Hotspare" if the user has only hot spares
DCSG00994728	Displaying incorrect PD size (Gib) for a particular 4k drive
DCSG00994744	Update splitpackage script for shenandoah
DCSG01035866	secureSignBin: implement feature to download the public key during signing or with explicit arg
DCSG01082488	secureSignSPDM: update CLI to use IP address instead of hostnames to workaround DNS issues from Taiwan factory
DCSG01070995	API change to support PD sanitize operations enhancements
DCSG00992844	Safestore: MegaRAID key management feature: volatile key escrow
DCSG01056506	Aero 9560/9580 - Add PSOC6 as Vision Controller
DCSG00977684	rquest for Win2022 Supportnfor Enablement launch, March 2022 RTS
DCSG01065378	 Add control command NO_CMD (0x99)
DCSG01064529	Update ControllerInfo Structure with PartNumber - API Changes
DCSG01131584	Aero_EFi : Erroris seen while flashing psoc.rom in cli.efi
DCSG01130532	MR 7.20 PSOC6 : Storcli 7.2005 can't start retention test, says No CacheVault Found!
DCSG01092227	MR7.20-Storclif reports BBU instead of cachevault for failed retention tests
DCSG01101813	OS drive name shown as N/A for multiple VDs
DCSG01035798	MR_7.20: Instance validation fails for "/c0 show all" and "controller-detailed-properties-schema.json"
DCSG01077564	CLI not iterating through MR_SAS_CONNECTORS for controllers
DCSG01109911	22B- Storcli- Device Type for Backplane & Expander in Alilog shown as Enclosure
DCSG01091937	22B Storcli: Spellling of mismatch is displayed as "Missmatch" in "Encryption type missmatch" error message.
DCSG01124638	Storcli : Copyright shows as year 2021 instead of 2022 & also build release year shows as 2021 instead of 2022
DCSG01052072	storcli 7.2001 does not return values for a bad drive



Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.



Component:
=========
SAS MegaRAID StorCLI
Release Date: 5/23/21


Version Numbers:	StorCLI
===============		===========
Current Version		007.1907.0000.0000		
Previous Version	007.1804.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG01124638 - Storcli : Copyright shows as year 2021 instead of 2022 & also build release year shows as 2021 instead of 2022
DCSG01131584 - Error seen while flashing psoc.rom in efi CLI
DCSG01052072 - storcli 7.2001 does not return values for a bad drive
DCSG01091937 - Spellling of mismatch is displayed as "Missmatch" in "Encryption type missmatch" error message.
DCSG01109911 - Device Type for Backplane in Alilog shown as Enclosure
DCSG01077564 - CLI not iterating through MR_SAS_CONNECTORS for controllers
DCSG01035798 - Instance validation fails for "/c0 show all" and "controller-detailed-properties-schema.json"
DCSG01101813 - OS drive name shown as N/A for multiple VDs
DCSG01092227 - Storclif reports BBU instead of cachevault for failed retention tests
DCSG01130532 - Storclif 7.2005 can't start retention test, says No CacheVault Found!
DCSG01024654 - Enclosure logical ID field is not displayed for BP connected to connected to controller.
DCSG01101780 - Set Patrolread command hangs while setting "excludevd"
DCSG01049757 - Strocli.efi utility got hung on issuing "storcli /c0 show" command
DCSG01040245 - "storcli /call show" shows jumbled drives in a Multi IT controller environment
DCSG00389591 - PD size displayed in Gib for some of the 4K drives is incorrect.
DCSG01083763 - PD Firmware Release Number = N/A is displayed for drive which has valid Firmware Release Number.
DCSG01002466 - Storcli shows success without proper description for "VD delete BBMT" command when no VD present.
DCSG00651204 - Update splitpackage script
DCSG01034883 - While trying to import foreign config, Storcli is not showing any drive if user has "Dedicated Hotspare" & also DHS is not displaying along with VD as well
DCSG01028926 - While trying to import foreign config, Storcli is not showing drive as "Hotspare" if the user has only hot spares
DCSG01064529 - Update ControllerInfo Structure with PartNumber - API Changes
DCSG00977684 - Request for Win2022 Supportnfor their launch, March 2022 RTS
DCSG00992844 - MegaRAID key management feature: volatile key escrow
DCSG01035866 - secureSignBin: implement feature to download the public key during signing or with explicit arg
DCSG01070995 - API change to support PD sanitize operations enhancements
DCSG01056506 - Aero 9560/9580 - Add PSOC6 as Vision Controller
DCSG01065378 - Add control command MFI_OOB_MCTP_CONTROL_EXCEPTION_NO_CMD (0x99) in API
DCSG01040562 - Change the attribute name "Secured" to "Locked" in PD Properties output
DCSG01091990 - Handling of VD target-ID's individually even when target-ID is assigned beyond maxLDs
DCSG01043616 - Windows Client Win11 OS Support



Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.




Component:
=========
SAS MegaRAID StorCLI
Release Date: 5/23/21


Version Numbers:	StorCLI
===============		===========
Current Version		007.1804.0000.0000		
Previous Version	007.1705.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG00906544 - Show command status not proper when issued with wrong EID
DCSG00778367 - SAS drive Inquiry data is not shown in drive show all output
DCSG00758645 - Segmentation fault noted with drive firmware update
DCSG00776953 - MR7.17_Storcli: On giving any functionality twice with storcli show returns success
DCSG00920244 - Vses Device Type is displayed as Enclosure for IT card
DCSG00840944 - Storcli shows no output for valid parameter for "/c0/p0,1,22 show" command.
DCSG00779151 - Failure observed while running set sbr command
DCSG00919659 - The foreign config of DHS/GHS details is not listing under foreign config import preview
DCSG00735452 - Storcli "/call/eall/sall download status" error message needs correction.
DCSG00904104 - Removed leading spaces for SATA drives
DCSG00706496 - Enclosure phyerrorcounters fails in VMware platform
DCSG00906735 - Storcli shows success for "set patrolread excludevd" command failure in the presence of VD.
DCSG00906989 - Storcli throws junk value is shown on set consistency check
DCSG00913840 - Allowing the command "storcli64 /c0 set OOB" on IT controller
DCSG00733214 - Storcli show incorrect property name for "/c0/d0,3 set hidden=off" command.
DCSG00931210 - Non Foreign drives GHS are listing under Foreign import  preview
DCSG00757768 - VD creation fails from storcli even though free capacity is present in DG
DCSG00916207 - Size of Degraded R10 Foreign VD is displayed as 0 KB in storcli
DCSG00735544 - CLI failing to stop a BGI or CC when paused.
DCSG00840899 - Support EKM filed is listed twice in showall output
DCSG00346485 - Avenger: phyerror counter values are not matching with sg util tool.
DCSG00542683 - Handling the read-only file system from storcli
DCSG00395234 - PH18 PA - StorCLI -  appropriate message needed for erase all excludemfg command
DCSG00916209 - Invalid Array Size in ZB is displayed for Degraded R1 span Foreign VD in storcli foreign import preview
DCSG00433143 - SEKM Support in CLI
DCSG00547179 - StorCLI has the ability to switch the OOB mode
DCSG00416992 - Get controller PSOC version information thru host interface
DCSG00416978 - StorCli doesn't show drive information when drive is in Unconfigured Bad or failed state
DCSG00936705 - Update comment for SL_ERR_IR_INVALID_FW_FLASH_IMAGE_NVDATA
DCSG00415441 - Get and display Expander PSOC information in storcli
DCSG00775114 - Displaying "OS name" for VDs imported from EHBA mode to RAID
DCSG00500922 - Display Enclosure serial No in Storcli

Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.





Component:
=========
SAS MegaRAID StorCLI
Release Date: 1/22/21


Version Numbers:	StorCLI
===============		===========
Current Version		007.1613.0000.0000	
Previous Version	007.1508.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG00320844 - StorCLI listing failed NVMe drives in non-sorted order
DCSG00315152 - PH17 PA - StorCLI ARM - show file command displays incorrect output for BIOS image
DCSG00303606 - MR7.16_storcli: VD creation with the remaining drives fails
DCSG00286693 - Enclosure position is showing as - for drive detailed properties on an IT controller
DCSG00301878 - Handling PBLP component whild displaying Image component versions
DCSG00383336 - Post reboot incorrect lane speed is displayed in Storcli when user sets it to 16GT/s
DCSG00368376 - coverity: fixing non-array delete and dereferencing before NULL checks
DCSG00337710 - "rval - 0" is displayed for "show phyerrorcounters" command.
DCSG00320649 - Storcli: learnStartTime displayed incorrectly in command details
DCSG00359247 - DiskGroup show all list Hostpare in Unconfigured drive list
DCSG00342456 - Logical ID of Cobra expander not displayed properly in Storcli and LSA
DCSG00389591 - PD size displayed in Gib for some of the 4K drives is incorrect.
DCSG00330381 - StorCLIF fail to flash firmware image of BTBL (BOOT_BLOCK) on Invader MR
DCSG00286677 - MR 7.15 StorCLI : Addressing Coverity defects
DCSG00408512 - Instance Validation Failed for "/call/fall import preview.json" and foreign-configuration-detailed-schema.json
DCSG00286349 - Max commands for averaging needs to be removed from DPMstat RA output
DCSG00290662 - Unified StorCLI MR7.15 - Fixing coverity issues - Part 1
DCSG00309398 - Atlas 4.2: StorCLI lists wrong error message "Failed in standard Inquiry", when user tries to upgrade/downgrade all connected NVMe Drives FW at a time
DCSG00386181 - Controller Lane show command is not working with individual Lanes
DCSG00323054 - CLI crashes when issuing the phyerrorcounters command on Expander backplane
DCSG00348125 - For empty SPDM slots 0 & 1  show security slot info command shows as Invalid data on IT controller.
DCSG00349415 - VD creation output shows  VD size as 0KB when it reaches maximum supported virtual disks(64VDs)  in a DG.
DCSG00391494 - From the CLI failed to convert UBAD  state drive to UGOOD
DCSG00299981 - Fixing Coverity defects of MR 7.15
DCSG00299788 - Storcli "show file" command does not report correct FW version
DCSG00264571 - On storcli /c0/v1,2,3,4 del if anyone of the vd in the series is not present then all the vd's are not deleted
DCSG00307346 - Coverity fixing bad allocator and resource leaks
DCSG00269017 - Coverity defects - remove resource leaks, invalid types in function arguments
DCSG00353195 - Storcli will not show LargeIOsupport is  enabled/disabled on the controller
DCSG00344079 - Storcli shows target id of the drive as  boot drive instead of showing drive slot number for JBOD drives.
DCSG00278049 - MR7.15_storcli: With the latest storcli, VD creation with the remaining drives fails
DCSG00244631 - Drives connected to IT controller reports Shield Counter
DCSG00359418 - Display port information for NVMe Init failed drives
DCSG00324401 - Adding new License file and updating the build script to include the new file
DCSG00370441 - MegaAPI: Add API changes for Support Parity Read Cache Bypass (PR: DCSG00245039)
DCSG00214472 - MR7.16 : Support WJ Pinning for both WB and WT Parity RAID VDs
DCSG00352896 - API change to add connector index as part of NVMe Init Error drive information
DCSG00265812 - SecureSign ECDSA: Implement support for elliptical curve signing for SPDM
DCSG00383671 - Additional NameSpace behavior changes
DCSG00353453 - Add optional arg '-hash_algorithm' that will accept -sha256 or -sha512 but if that arg is not provided then it will default to -sha512
DCSG00306898 - Update SIGNIMAGEX to v2.12.00
DCSG00348441 - Add pkeyopt argument and support for checking for zero length input file and fail with appropriate error
DCSG00282976 - Updating storcli BST scripts to support new VBAS Auto BST procedure
DCSG00313199 - API changes for reporting missing cables
DCSG00332867 - MegaAPI: rename WJ events and change event messages (PR: DCSG00166915)
DCSG00083851 - Updating command legends as per the command output
DCSG00301782 - Add support for reporting SPDM Measurement Specification and Hash Algorithm
DCSG00312334 - MegaAPI: Add API changes for Support WJ Pinning for both WB and WT Parity RAID VDs (PR: DCSG00166915)
DCSG00313996 - Make updating the embedded key( step 1) of securesign optional.
DCSG00255109 - MR7.16: StorCLI does not show the SAS Address of the enclosure
DCSG00369036 - Update Windows CNG Key Gen and Signing operations to use SHA1 of CA Cert value from new CQ field
DCSG00395629 - Add -p2 arg to validation signImageX command
DCSG00264744 - MR7.16 StorCLI: Ruby SED Support
DCSG00396377 - Implement secureSignLinuxDrv CLI tool for HSM managed keys with support for certTypes PKCS7|X509 using NFKM engine
DCSG00348813 - CLI to handle ERROR_BUSY from Windows storport
DCSG00318591 - storcli "set good" command can still be used for JBOD EPD-PT drives
DCSG00239672 - CLI:  Package Stamping Verification During Firmware Update
DCSG00249963 - SMART Polling Improvement
DCSG00255367 - PERCcli turn off logging by default


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.



Component:
=========
SAS MegaRAID StorCLI
Release Date: 12/11/20


Version Numbers:	StorCLI
===============		===========
Current Version		007.1508.0000.0000		
Previous Version	007.1507.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG00320641 - PH17 PA - StorCLI ARM - show file command displays incorrect output for BIOS image
DCSG00321815 - StorCLI listing failed NVMe drives in non-sorted order
DCSG00321908 - MR 7.16: Storcli: learnStartTime displayed incorrectly in command details
DCSG00337735 - "rval - 0" is displayed for "show phyerrorcounters" command.
DCSG00360517 - DiskGroup show all list Hostpare in Unconfigured drive list
DCSG00386184 - Controller Lane show command is not working with individual Lanes


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.





Component:
=========
SAS MegaRAID StorCLI
Release Date: 10/9/20


Version Numbers:	StorCLI
===============		===========
Current Version		007.1507.0000.0000		
Previous Version	007.1506.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG00316771 Adding new License file and updating the build script to include the new file
DCSG00306898 Update SIGNIMAGEX to v2.12.00
DCSG00353453 Add optional arg '-hash_algorithm' that will accept -sha256 or -sha512 but if that arg is not provided then it will default to -sha512
DCSG00348441 Add pkeyopt argument and support for checking for zero length input file and fail with appropriate error
DCSG00313199 API changes for reporting missing cables
DCSG00332867 MegaAPI: rename WJ events and change event messages (PR: DCSG00166915)
DCSG00318591 equesting that storcli "set good" command can still be used for JBOD EPD-PT drives
DCSG00312334 Add API changes for Support WJ Pinning for both WB and WT Parity RAID VDs (PR: DCSG00166915)
DCSG00313996 Make updating the embedded key( step 1) of securesign optional.
DCSG00265812 SecureSign ECDSA: Implement support for elliptical curve signing for SPDM
DCSG00353134 turn off logging by default
DCSG00323720 CLI crashes when issuing the phyerrorcounters command on a 14G Expander backplane
DCSG00353213 CLI should handle getting the status ERROR_BUSY from Windows storport
DCSG00330381 StorCLIF fail to flash firmware image of BTBL (BOOT_BLOCK) on Invader MR
DCSG00353195 Storcli will not show LargeIOsupport is  enabled/disabled on the controller
DCSG00348125 For empty SPDM slots 0 & 1  show security slot info command shows as Invalid data on IT controller.
DCSG00349415 VD creation output shows  VD size as 0KB when it reaches maximum supported virtual disks(64VDs)  in a DG.
DCSG00344079 Storcli shows target id of 





Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.



Component:
=========
SAS MegaRAID StorCLI
Release Date: 9/25/20


Version Numbers:	StorCLI
===============		===========
Current Version		007.1406.0000.0000		
Previous Version	007.1410.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG00152961	VenturaMR7.14:Storcli: Description for "profileid=<id>" is missing in help and detailed help
DCSG00150460	MR 7.14: Storcli64 /cx show spinupdrivecount help file description needs update
DCSG00236773	Inconsist DG number in StorCLI
DCSG00214249	MR_7.14: Storcli output starts with "GetCtrlInfo : ProcessLibCommand failed; retCode = 0xFF"  for all command at VMWARE X64 OS
DCSG00146568	Cache Vault should be placed instead of battery for "storcli /cx/cv show status ?" help
DCSG00146567	show security spdm command failure
DCSG00263285	Foreign Config Preview shows empty data when Foreign config is present with Rebuild is in Progress.
DCSG00301885	Handling PBLP component whild displaying Image component versions
DCSG00146570	/e: and /s: is not mentioned in the Convention for /storcli64 /c0/v0 start migrate detailed ?
DCSG00316127	Add support for reporting SPDM Measurement Specification and Hash Algorithm
DCSG00149394	MR 7.14 : Storcli /c0/eall show status extended command fails to generate any output for ARM server backplane.
DCSG00150461	./storcli /cx add vd verbose help ,strip size 512 is missing in help description under strip sizes.
DCSG00304964	With the latest storcli, VD creation with the remaining drives fails
DCSG00256385	Enclosure position value not listed properly in show all command
DCSG00286703	Enclosure position is showing as - for drive detailed properties on an IT controller
DCSG00244146	Incorrect Adapter type shown in the perccli show all output
DCSG00234402	The controller property name for the supported auto config options is not consistent when using the show personality and show autoconfig commands.
DCSG00227485	CLI - Auto configure options is shown as blank in the show personality command and not at all for the show autoconfig command for iMR
DCSG00298209	Updating storcli BST scripts to support new VBAS Auto BST procedure
DCSG00239810	Package Stamping Verification During Firmware Update
DCSG00215109	Segmentation with controller show summary command when controller is in unsupported state
DCSG00248017	MR 7.15: Storcli: "No Controller found" shown when controller is busy.
DCSG00253642	Observed CLI Crash on windows while setting Autoconfig option ON
DCSG00247163	MR 7.15: Storcli: Show expansion shows wrong output in presence of JBODs.
DCSG00167354	Storcli 7.15: "Show alilog" command output shows invalid PD ID in Virtual drive info.
DCSG00167210	MR 7.15 : Storcli_VMWare gives failure messages when user tries to set the lanespeed.
DCSG00221625	Aero MR715PA - Duplicate and missing entries for storcli /c0/eall/sall show repair
DCSG00239870	Ph16_storecli:Expander firmware download help need to be corrected for IT controller.
DCSG00253652	MR 7.15: Storcli: RTTdump shows success but it fails to download the dump.
DCSG00228667	MR 7.15: Storcli: "show bbmt" displays output for an invalid VD.
DCSG00244631	Drives connected to IT controller reports Shield Counter
DCSG00165527	MR 7.15: Storcli: VD delete command works with multiple force options
DCSG00239524	Ph16_storecli: Expander firmware download using with mode 5 option fail with error message.
DCSG00307346	Coverity fixing bad allocator and resource leaks
DCSG00235628	MR7.15_CLI memory exhausted
DCSG00269017	Coverity defects - remove resource leaks, invalid types in function arguments
DCSG00264571	MR7.15_Storcli: On storcli /c0/v1,2,3,4 del if anyone of the vd in the series is not present then all the vd's are not deleted
DCSG00221431	Storcli command description shows none for Download firmware failure
DCSG00257307	With new MR API changes, storcli shows failure while changing accesspolicy
DCSG00290662	Unified StorCLI MR7.15 - Fixing coverity issues - Part 1
DCSG00299788	Storcli "show file" command does not report correct FW version
DCSG00167732	PH16 PA - StorCLI - Compare fwprodid help page needs to be updated
DCSG00249023	Connector Name is incorrectly displayed when connector count goes beyond 8
DCSG00250066	MR 7.15: Storcli: Instance Validation Failed for "enclosure-fw-download-schema.json"and "enclosure FW download" output.
DCSG00253630	MR 7.15: Storcli: Delete config shows no description
DCSG00278049	MR7.15_storcli: With the latest storcli, VD creation with the remaining drives fails
DCSG00225932	Shenandoah : Alpha1 : The legend for PD count comes as " Physical Drives count" , instead of  " Drives count"  in enclosure information
DCSG00223195	MR 7.15: Storcli: Force option is mentioned as "For"
DCSG00286677	MR 7.15 StorCLI : Addressing Coverity defects
DCSG00247992	MR 7.15 StorCLI: JSON instance Validation Fails when controller is in busy state
DCSG00150686	Ph16 PA: Storcli: Storcli crash observed while running show all with NVMe drives connected
DCSG00309398	Atlas 4.2: StorCLI lists wrong error message "Failed in standard Inquiry", when user tries to upgrade/downgrade all connected NVMe Drives FW at a time
DCSG00249090	MR 7.15: Storcli: Status should be shown as failure for "/c0/v0 show bbmt" when VD is not present.
DCSG00245693	MR 7.15: Storcli: Instance Validation Failed for /call/show_all.json and controller-detailed-properties-schema.json
DCSG00227516	MR 7.15: Storcli: "/c0 show assemblynumber" shows syntax error with page=X
DCSG00255147	MR7.15 Alpha: Storclif -v option no longer shows storclif in output unlike previous versions
DCSG00242330	storcli does not report a range of Response time in DPM History which is not clear.
DCSG00255097	MR 7.15: Storcli: Instance Validation Failed for "controller-properties-schema.json"and "/call show" output.
DCSG00257549	Storcli 1504 does not report Average Response Time separately for Read and  Write which is used in design document charts.
DCSG00299981	Fixing Coverity defects of MR 7.15
DCSG00257401	MR 7.15: Storcli:"v" command shows no output.
DCSG00286349	Storcli 1504 DPM results need proper descriptions as explained in this DF.
DCSG00212930	Add warning to VD erase help description
DCSG00167287	PH16 PA - StorCLI - UEFI crash noted with 'show file' command
DCSG00222722	MR 7.15: Storcli: Incorrect warning during storcli upgrade.
DCSG00166038	MR 7.15: Storcli: Segmentation fault with logfile.
DCSG00167761	MR 7.15: Storcli: Version check with incorrect input should display syntax error.
DCSG00216344	Remove 32bit OS support from windows and Linux storcli packaging
DCSG00148255	MR 7.14_Storcli: force is not defined under OPTIONS in storcli64 secureerase help file
DCSG00167882	MR 7.15 : storcli64.exe /cx/px compare ? command convention requires modification w.r.t IT controller support.
DCSG00258796	Winterton: StorCli.efi -v is not working in EFI environment
DCSG00248990	MR 7.15: Storcli: Instance Validation Failed for "enclosure-drive-schema.json" and "/call/sall show"
DCSG00244961	[Atlas Behind Aero]: StorCLI is listing enclosure temperature but without temp units (Not sure, if its in Celsius or Fahrenheit)
DCSG00307042	API clarification for large io support
DCSG00293141	MPI 2.6: Header file changes associated with revision 2.6.11
DCSG00146348	Eliminate reporting of capcaitance over 100%
DCSG00146578	Storcli PowerPC cross compiler support
DCSG00146351	Operation behind controller - coordinate reset on Atlas FW update to prevent unnecessary RAID volume cleanup due to devices spontaneously being removed while IO is active
DCSG00216178	Arm Linux Cross Compilation Support
DCSG00132769	Provide a better error message when FW replies that write cache policy = WB | AWB is not supported
DCSG00231443	MR7 API: Add package incompatibility reporting
DCSG00217236	cli: Autoconfig API Improvement
DCSG00231904	New MFI Stat for the updated recon behavior
DCSG00257777	MR API: MFI SMP Port Num related changes
DCSG00256271	MR API: add return status MFI_STAT_OK_REBOOT_REQUIRED to MR_DCMD_LD_SET_PROPERTIES
DCSG00292323	MR API: reclassify MR_EVT_CTRL_FW_VALID_SNAPDUMP_AVAILABLE as informational
DCSG00234646	Implement customSign.exe CLI wrapper utility to help customers sign with their private key
DCSG00222915	API change to support entering boot time password (Secret Key) using DCMD outside critical Boot message infrastructure
DCSG00226286	Preboot Trace Buffer [PTB] for Ventura/Aero - add a switch - MR API
DCSG00282676	MegaAPI: Add API Controller Properties and MFCD for ParityReadCacheBypass (PR: DCSG00237022)
DCSG00055878	Ruby SED Support - MR API
DCSG00229416	New MFI Stat for the updated recon behavior
DCSG00246317	SMART Polling Improvement - API Changes
DCSG00254845	SL API: Changes to support 16port connection to Expander with AeroIOC
DCSG00216179	Arm UEFI Cross Compilation Support
DCSG00214352	SMART Polling Improvement - API Changes






Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI 

Component:
=========
SAS MegaRAID StorCLI
Release Date: 6/26/20


Version Numbers:	StorCLI
===============		===========
Current Version		007.1410.0000.0000		
Previous Version	007.1316.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG00005425 - Check in MPI 2.6 2.6.9 Headers
DCSG00151058 - API changes to expose MR_AUTO_CFG_PARAMETER for NONE mode
DCSG00167313 - Add new security events for API
DCSG00034153 - StoreLib.h: Enhanced debug logging mechanism
DCSG00004021 - Storelib header changes for managed switch
DCSG00024640 - MPI 2.6: Header file changes associated with Revision 2.6.9 of the specification
DCSG00020567 - MPI 2.6: Add additional IOC_State (CoreDump) to allow firmware to dump debug logs without being reset by host.
DCSG00034335 - Storelib.h: Add new SL API SL_OOB_SET_TRANSPORT_TYPE to dynamically load SL in any oob mode
DCSG00053982 - StoreLib API: Update SL_GET_ENCL_LIST plcp->cmdParam_1b[0] for extended/legacy enclosure structures
DCSG00214170 - MR_7.14: Storcli output starts with "GetCtrlInfo : ProcessLibCommand failed; retCode = 0xFF"  for all command at VMWARE X64 OS
DCSG00061230 - StoreLib header: Update comments in Topology structures for attached devices to Atlas
DCSG00146359 - MR 7.14 : Storcli /c0/eall show status extended command fails to generate any output for ARM server backplane.
DCSG00152251 - Storcli: Description for "profileid=<id>" is missing in help and detailed help
DCSG00150052 - MR 7.14: Storcli64 /cx show spinupdrivecount help file description needs update
DCSG00134416 - MR API: Change event class for SPDM events
DCSG00137933 - StorCLI to support UBM4 backplanes (same as UBM 3 backplanes with a modified PIC FW support)
DCSG00040377 - Port secureSignBin.exe for signing to GCP server environment
DCSG00105430 - Implement changes to secureSign signing tool and infrastructure to support mixed list of PublicKeys
DCSG00121862 - Populating port name of a UBM U.2/3 backplane with NVMe drives
DCSG00134764 - Updating toolchain for VMware7.0 GA
DCSG00077215 - Signing Linux executables via GPG method in HSM
DCSG00048670 - Aero multi-party signing partial signing of images
DCSG00127133 - MR 7.14: Storcli: Wrong enclosure details are displayed when slot details are queried.
DCSG00129611 - MR 7.14: Storcli: "Controller 0 not found" when commands execute in specific patterns.
DCSG00137767 - get and set exception case description observation
DCSG00139659 - Unified StorCLI Phase 15: storcli64 /cx add vd each help file missing options and format inconsistencies
DCSG00138580 - MR_7.14: Storcli displays "Returned SCSI status for the command : Check condition" along with regular command output.
DCSG00129738 - MR 7.14: Storcli: storcli64.exe /c0/e1/s1 start sanitize throws syntax error.
DCSG00138192 - Handling of controller properties related to drive FW download
DCSG00129610 - MR 7.14: Storcli: No description for "set autoconfig=R0 immediate" command.
DCSG00131660 - Aero A0: Adapter type for Aero 8e shows up SAS3816 instead of 3808
DCSG00082981 - Use NVRAM to save PTB information -- API changes
DCSG00129798 - MR 7.14 : storcli shows No description for get rttdump command.
DCSG00081932 - Alarm status shown as missing on controllers.
DCSG00132488 - MR 7.14: Storcli: Instance Validation Failed for /call/show_all.json and controller-detailed-properties-schema.json






Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.




Component:
=========
SAS MegaRAID StorCLI
Release Date: 4/3/20


Version Numbers:	StorCLI
===============		===========
Current Version		007.1316.0000.0000		
Previous Version	007.1211.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG00108999 - storcli: support for sanitize command
DCSG00060713 -  Preboot Trace Buffer [PTB] for Ventura/Aero - MR API
DCSG00065881 -  API change to support media states for UEFI Sanitize protocol
DCSG00077856 -  Remove (hide) PCIe Link form in HII and from CLI 
DCSG00072780 -  FW SAS MEGA API: Include new field cannotSetAutoR0Mode in MR_AUTO_CFG_PARAMETER structure.
DCSG00071066 -  MR_SAS_PHY_CONNECTION.currentSpeed when no devices are connected
DCSG00071534 - MR API: NVME Drive Init Error Report and Repair for Aero/Ventura
DCSG00076992 - Set VD policy to WB (unsupported )should return failure in JBOD personality.
DCSG00077037 - StorCLI - Restrict discovery of HBA through StorCLI(Static binary)
DCSG00073393 - Reverting back the changes made for Span setting for RAID 1 & 10
DCSG00074600 - VMware storcli64 bit binary loads library from  32 bit's installation  path
DCSG00071756 - Port information coming as internal and Location as Blank in  when all the drives are removed from UBM2 Backplane
DCSG00065815 - Storcli: GHS is shown as revertible.
DCSG00074732 - Storcli show Device type as backplane while no drives are connected.
DCSG00071410 - StorCLI - '/c0 show nolog' reported as  Un-supported Command
DCSG00074731 - Enclosure Bay count coming Wrong in CLI
DCSG00072117 - an abnormal info occurs when storcli is executed under EXSi 7
DCSG00071417 - Syntax error seen while using "nolog" and "page" together as parameters.
DCSG00072628 - Re-Host information is blank when ASO is not enabled
DCSG00074791 - SSD Wear guage  Parameter "SSD Percent used" to be removed from CLI
DCSG00068659 - Revert the CLI Help Text for backwards compatibility to include Dimmer Switch 3
DCSG00068879 - /cx restart is not supported in EFi environment should be mentioned in help storcli help file.
DCSG00068868 - MR 7.13_Storcli: Instance Validation Failed for "/call/fall import preview" and foreign-configuration-detailed-schema.json
DCSG00069746 - MR 7.13 - Command description should be modified for storclif /cx set activityforlocate=<on|off>
DCSG00068441 - Unified StorCLI 7.13 : Commands displayed twice in help description.
DCSG00068453 - MR 7.13 : Foreign topology table display BT as "Y" for drives which are in foreign state.
DCSG00061230 - StoreLib header: Update comments in Topology structures for attached devices 
DCSG00069690 - MR7.13_Storcli: On OS /cx/dall split mirror command shows success when there is no drive groups
DCSG00068427 - MR 7.13 : Foreign DHS drive state is displayed as UGood under /c1/fall show all tab.
DCSG00068542 - MR 7.13: Storcli: No mention on convention in restart command description.
DCSG00069703 - MR 7.13 - Extended the abbreviation in the legends
DCSG00068592 - MR 7.13: Storcli: No consistency in legend display for /call/fall show command.
DCSG00068444 - Unified StorCLI 7.13 : "set sbr" command mentioned in detailed help but not listed in help output.
DCSG00067103 - Set the PR to run on only configured array, but it complete the PR along with un-configured area.
DCSG00068877 - Show latest events output print shows 0.00 for all the number of events dumped (expected is the number of events queried for)
DCSG00069312 - Legend for ID in JBOD list is missing
DCSG00069698 - Storcli throws incorrect error message for /c0 add vd each r0 when Ubad drive is present in the setup.
DCSG00069730 - Debug logs in FreeBSD is logging timestamp in different lines
DCSG00068482 - MR 7.13: Storcli: "/c0 show nolog" shows as "un-supported command.
DCSG00070258 - Storcli 7.13: Description of compare firmware ver command does not mention as IT supported command.
DCSG00069693 - The status of PD FW update on multiple drives is not proper when parallel is not included
DCSG00069709 - MR 7.13 - Command description should be modified for /cx set alarm command.
DCSG00063317 - MR 7.13: Storcli: ProdID Legend abbreviation missing in /c0/eall show output.
DCSG00058867 - MR 7.13: Storcli: Enclosure ID is not mentioned as optional in "add Vd " command.
DCSG00058329 - StorCLI - Remove deprecated command 'show adpcount' from Ubuntu folder(readme)
DCSG00062615 - MR 7.13: Storcli: In the presence of Locked Foreign config, "/c0/fall del" shows incorrect output.
DCSG00058162 - Not able to create R1/R10 with 1MB size and strip size is 1MB
DCSG00063696 - Orion MR : Help Description for Migrate shows "operation" printed twice in Storcli output.
DCSG00063626 - Orion MR : Description for storcli output is not proper after collecting the snapdump with id=all
DCSG00064745 - MR 7.13: Storcli: No consistency in the help details of "/c0/ex download" commands.
DCSG00058874 - MR 7.13: Storcli: Incorrect Legend abbreviation in storcli show output.
DCSG00064748 - MR 7.13: Storcli: Same help description across "/c0/e0 show" and "/c0/e0 show all".
DCSG00058688 - Storclif command for battery retention test  issues command to  start retention test which is an unsupported command
DCSG00060706 - MR 7.13: Storcli DPM does not use legend "Resp" in EXT output
DCSG00061230 - StoreLib header: Update comments in Topology structures for attached devices to Atlas
DCSG00057823 - MR 7.13_storcli: Schema mapping list is not updated for the new storcli commands
DCSG00005425 - Check in MPI 2.6 2.6.9 Headers
DCSG00024640 - MPI 2.6: Header file changes associated with Revision 2.6.9 of the specification
DCSG00020567 - MPI 2.6: Add additional IOC_State (CoreDump) to allow firmware to dump debug logs without being reset by host.
DCSG00052049 - Fixing Coverity defects, uninitialized, unused variables and memory leaks
DCSG00052275 - StorCLI crash when create VD
DCSG00040377 - Port secureSignBin.exe for MARGAY signing to GCP server environment
DCSG00036689 - New Event for firmware DMD handling
DCSG00034153 - StoreLib.h: Enhanced debug logging mechanism
DCSG00043198 - Remove Span setting for RAID 1 & 10
DCSG00043240 - Support for the New Energy Pack states
DCSG00046064 - SSD  Wear Gauage
DCSG00040165 - API change to support HPE Branding changes for 1. UBM2/UBM3 Back planes, and 2. Power loss state for Energy pack
DCSG00042985 - Update MR API mr_drv.h  to modify field for RTTRace_header
DCSG00048859 - Creating VD with 0 MB or GB should not be allowed to succeed --ve case boundary value scenario
DCSG00034335 - Storelib.h: Add new SL API SL_OOB_SET_TRANSPORT_TYPE to dynamically load SL in any oob mode
DCSG00038937 - API changes for Request to change all BBU messages to CacheVault.
DCSG00039542 - Phase 14 : StorCLI should provide power cycle message post erase all command is executed
DCSG00049781 - Implementing span depth logic and pd per array count for RAID 10
DCSG00050763 - Updating BST scripts to support auto BST through VBAS in clear case version 9


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.



Component:
=========
SAS MegaRAID StorCLI
Release Date: 12/30/19


Version Numbers:	StorCLI
===============		===========
Current Version		007.1211.0000.0000		
Previous Version	007.1108.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
DCSG00036689: New Event for firmware DMD handling
DCSG00034153: StoreLib.h: Enhanced debug logging mechanism
DCSG00034335: Storelib.h: Add new SL API SL_OOB_SET_TRANSPORT_TYPE to dynamically load SL in any oob mode
DCSG00038937: API changes for Request to change all BBU messages to CacheVault.
DCSG00039104: MR 7.12_Storcli: The latest storcli vmware build reference URL shows "http://www.lsi.com"
DCSG00039112: MR 7.12_Storcli: The latest storcli vmware build 007.1209.0000.0000 shows older package version
DCSG00034379: Aero Alpha: Storcli stops functioning during run of attached script
DCSG00037088: Storcli returns wrong Operating system in Windows.
DCSG00031711: Orion MR : Description for storcli output is not proper after collecting the snapdump with id=all
DCSG00023770: API changes needed for DPMstat support in MegaRAID SAS 3.5 controllers
DCSG00020567: MPI 2.6: Add additional IOC_State (CoreDump) to allow firmware to dump debug logs without being reset by host.

SCGCQ02150651: Instance Validation Failed for "/call/cv show all" and cache-vault-detailed-schema.json
SCGCQ02150921: Instance Validation Failed for "/call/eall show status" and enclosure-status-schema.json
SCGCQ02158600: storcli -help missing the verbose option
SCGCQ02169536: PH11 - StorCLI - Incorrect message for /call/pall show all command
SCGCQ02173203: Incorrect Status for PD FW Download (Ventura IT)
SCGCQ02174934: Usage of 64 bit address instead of 32bit address while sending commands to FW in uEFI driver less environment
SCGCQ02132024: Background operations keep on progressing after hitting /c0 shutdown from storcli
SCGCQ02165933: MR7.11_Storcli: Incorrect error description while creating r1 with single drive
SCGCQ02165944: MR7.11_Storcli: On drive rebuild, there is a mismatch between the pd rebuild state and respective legend
SCGCQ02174040: StorCLI Copyright Notice Needs to be updated
SCGCQ02150924: Instance Validation Failed for "/call/eall show status extended" and enclosure-status-extended-schema.json
SCGCQ02168197: PD FW Download is failing for Mode f
SCGCQ02168895: Storcli stop erase needs an help file update
SCGCQ02169242: Phyreset Fails on IT controllers
SCGCQ02170389: Unsupported Drive State is Displayed for "./storcli /c0 show" Command
SCGCQ02157359: Snap Dump ClearAll Method logging event
SCGCQ02173513: Create an event for DDF config clear failed event.
SCGCQ02127226: StorCLI LibMods: Modification of debug logging mechanism in LibMods
SCGCQ02150037: StorCLI LibMods: Modification of debug logging mechanism in LibMods
SCGCQ02158611: MPI 2.6: Header file changes associated with Revision 2.6.9 of the specification
SCGCQ02012115: Aero NVMe Readiness improvements
SCGCQ02150028: StorCLI: Modification of debug logging mechanism
SCGCQ02153088: Adding support for Atlas in CLI
SCGCQ02149918: NVMe Readiness improvements
SCGCQ02150575: Adding support for Atlas in CLI
SCGCQ02160016: Support in storCLI support PD firmware download for 3008IR/3008IT controllers



Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.



Component:
=========
SAS MegaRAID StorCLI
Release Date: 9/27/19


Version Numbers:	StorCLI
===============		===========
Current Version		007.1108.0000.0000		
Previous Version	007.1017.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ02146846	Add NVMe width comments to mr.h
SCGCQ02142981	Fix API changes done for NVMe readiness
SCGCQ02116380	CLI returns "success" when attempting to set DS3 or DS4 to enabled
SCGCQ02114332	CLI returns "success" when attempting to change the H840 controler to eHBA personality.
SCGCQ02084966	CLI returns wrong error code upon failure
SCGCQ02062957	Instance Validation Failed between "controller-detailed-properties-schema.json" and "show_all"
SCGCQ02083828	Storcli: Incorrect message while executing "storcli64.exe /c0/v0 del discardcache"
SCGCQ02084549	Failure status for /call/sall and /call/eall/sall command.
SCGCQ02089892	Storcli: Error in /c0/f0 command output.
SCGCQ02090770	StorCLI listing PD Slot Status as "Incorrect Status Value" for configured PD's
SCGCQ02091548	Storcli doesn't exit with controller status message after doing OFU.
SCGCQ02096722	MR7.11_Storcli: storcli show output shows UBUnsp as UBad Unsupported where as UGUnsp just Unsupported
SCGCQ02096774	Libmod changes for SCGCQ02090770
SCGCQ02097647	Aero (DBU PA3): Storcli: FW hits Megamon while executing storcli in EFI shell when EFI Driver is unloaded.
SCGCQ02103217	StorCLI PH12: Retrieving topology details causes application crash in some scenario
SCGCQ02114898	MR 7.11: Storcli.efi: On ARM server, incomplete configuration data received error is observed for any storcli.efi command
SCGCQ02117749	StorCLI crashes for 'storcli J command
SCGCQ02119004	PH12 PA - StorCLI /cx/pall show fails on 9400-8e board
SCGCQ02121705	Adding missing syntax for the command deviceorderbyfirmware
SCGCQ02123769	StorCLI: Fixing coverity defects
SCGCQ02124492	storclif /cx delete colinfo  ? shows syntax error
SCGCQ02124508	Storcli:  VD legend is missing in "/call/vall show expansion" command.
SCGCQ02124632	Aero DBU PA4 : storclif /cx show configautobalance  ? help output shows the name as "show NCQ"
SCGCQ02124667	Aero DBU PA4 : Command name shown in help output differs for storclif.efi /cx show limitmaxrateSATA ?
SCGCQ02124673	DBU Aero PA4 : Cosmetic error is seen in command description for Show SSDThermalPollInterval ?
SCGCQ02135420	Instance Validation Failed for /call/show.json and controller-properties-schema.json
SCGCQ02135526	Instance Validation Failed for /call/show_all.json and controller-detailed-properties-schema.json
SCGCQ02142017	Aero (DBU PA5):Storcli: Force is not mentioned as key word in "/cx/vx del" error message.
SCGCQ02142068	Drive mode-e fw download with activatenow is not working
SCGCQ02145716	complete Lane WWID is not displayed
SCGCQ02150651	Instance Validation Failed for "/call/cv show all" and cache-vault-detailed-schema.json
SCGCQ02150921	Instance Validation Failed for "/call/eall show status" and enclosure-status-schema.json
SCGCQ02158600	storcli -help missing the verbose option
SCGCQ02169536	PH11 - StorCLI - Incorrect message for /call/pall show all command
SCGCQ02173203	Incorrect Status for PD FW Download (Ventura IT)
SCGCQ02174934	Usage of 64 bit address instead of 32bit address while sending commands to FW in uEFI driver less environment
SCGCQ02125408	Perccli does not enable Power Save mode for UG & HS type 1 & type 2.
SCGCQ02086726	StorCLI: Delete config failure message need correction
SCGCQ02083992	StorCLI:VD reference in Delete preserved cahce command output -Branding
SCGCQ02019751	Storcli displays incorrect error message for unmap VD creation with regular HDD drives.
SCGCQ02082208	Aero (DBU PA2): Storcli: /cx/mx command does not mention about "Auto" settings.
SCGCQ02083822	Storcli: Force is mentioned as optional in snapdump delete command.
SCGCQ02084752	Help of /cx/px compare command needs update and /cx/px reset ? shows syntax error.
SCGCQ02100491	No proper legends in /fall output.
SCGCQ02101372	Json Schema for the command "storcli /cx/ex show phyerrorcounters" needs to be updated
SCGCQ02101558	Aero (DBU PA3): Storcli: Incorrect schema mapping for "/cx set  autoconfig " command.
SCGCQ02108770	MR 7.11: Storcli: Instance Validation Failed for "/call show" and controller-properties-schema.json.
SCGCQ02112424	Drives connected to active backplanes not showing the phy info in connector name
SCGCQ02113241	Storcli: OCR helps needs update.
SCGCQ02113358	Storcli: No proper description of set and show sesmultipathcfg.
SCGCQ02115036	In ARM server UEFI shell, storcli.efi hangs forever when storcliconf.ini is present
SCGCQ02116806	StorCLI: File sync issue with rel and dev stream for MR 7.10
SCGCQ02117219	"Storcli /c# set jbod=on" shows success but does nothing
SCGCQ02123789	Storclif doesn't show details for VF/PF in help file for vfmap command .
SCGCQ02125523	StorCLI: Fixing coverity defects for second run
SCGCQ02132024	Background operations keep on progressing after hitting /c0 shutdown from storcli
SCGCQ02135510	MR 7.11: Storcli: Instance Validation Failed for /call/show_consistencycheck.json and controller-cc-schema.json
SCGCQ02137751	Lenovo Orion IT:- Command to flash UEFI on Aero/sea HBA from storcli/scrutiny fails
SCGCQ02146466	PH12 BETA - /cx erase help not listing all commands
SCGCQ02146814	"Show" and "show all" output Description is shown as "No Enclosures found"
SCGCQ02146822	Storcli: "Ctrl" legend not mentioned.
SCGCQ02165933	MR7.11_Storcli: Incorrect error description while creating r1 with single drive
SCGCQ02165944	MR7.11_Storcli: On drive rebuild, there is a mismatch between the pd rebuild state and respective legend
SCGCQ02174040	StorCLI Copyright Notice Needs to be updated
SCGCQ02083991	Shenandoah_StorCLI:VD reference in CLI outout for Firmware update command failure case
SCGCQ02082949	Incorrect string displayed in show command in FreeBSD OS
SCGCQ02085630	MR_7.10_Storcli: "storcli show file=filepath" command shows failure status.
SCGCQ02086669	PCI Linkconfig configid status is failure, even though it was set
SCGCQ02089427	Storecli_Aero: Using latest storecli show file command "Aero-DVT -HBA 9500-16e" board  output version number shows wrong.
SCGCQ02089862	Libmods changes for defect SCGCQ02062957
SCGCQ02091155	Help update for "add vd cachevd" command as Normal VD is created with failure status.
SCGCQ02106218	Preserved cache help file shows a mismatch in command and the convention.
SCGCQ02113377	Aero DBU PA4 : Storcli doesn't show the convention details properly for storclio /cx/px show command
SCGCQ02113506	Aero (DBU PA4):Storcli: Syntax error for /c0 show AliLog ?
SCGCQ02119091	Aero (DBU PA4):Storcli: Typo in /c0 add vd detailed help.
SCGCQ02121783	PH12 PA - StorCLI - 9310-8i IR FW download fails
SCGCQ02123765	Aero DBU PA4 : Storclif should not display vendor name in storclif.efi  /cx/ex download help command
SCGCQ02123790	StorCLI: Fixing coverity issue in libmod
SCGCQ02125598	Phase12-Storcli- In Windows storcli64.exe /c0 show htbparams is showing random values for SAS3 controller
SCGCQ02139780	Flashing of Completeflash fails on Sea IT controller
SCGCQ02140873	For Snapdump command, norttdump should be independent and optional.
SCGCQ02142022	Aero (DBU PA5):Storcli: No consistency in the usage of "|" in the command such as "on|off".
SCGCQ02150924	Instance Validation Failed for "/call/eall show status extended" and enclosure-status-extended-schema.json
SCGCQ02168197	PD FW Download is failing for Mode f
SCGCQ02168895	Storcli stop erase needs an help file update
SCGCQ02101095	Device Type for non-UBM backplanes are being shown as Enclosure instead of Backplane
SCGCQ02062942	Instance Validation Failed between "controller-patrolread-schema.json" and "/call resume patrolread"
SCGCQ02096732	MR7.11_Storcli: storcli set securitykey detailed help does not show description for all the options
SCGCQ02100905	Details are displayed twice in "/cx/bbu start ? "
SCGCQ02113353	Storcli: set termlog shows [=on|off] mentioned as optional.
SCGCQ02146819	No "Rbld" legend during rebuild.
SCGCQ02146823	Help note 'page=[x]' needs update
SCGCQ02122169	Percli returns invalid arguments" when trying to create a VD using some PDs already configured in a VD and some U
SCGCQ02094970	Junck character displayed in Virtual SES phy id, when we query phyerror counter for enclosure.
SCGCQ02100896	Aero (DBU PA3):Storcli: Help of /cx/px reset does not mention about option hard reset.
SCGCQ02100915	BBU show detailed help does not list "show learn " command.
SCGCQ02101564	Storcli: Instance Validation Fails for all /call/e65/sall commands where "e65 is not found".
SCGCQ02105185	PH12 PA - StorCLI version not getting printed for show file command
SCGCQ02112192	MR 7.11: Storcli: Instance Validation Failed for "/call show all" and system-schema.json
SCGCQ02113316	MR 7.11: Storcli: Instance Validation Failed for "/call/vall show unmap" and vd-unmap-schema.json.
SCGCQ02113484	Storcli: Remove Nytro supported options in "/cx [start] flush|flushcache [cachecade  | ALL]" help.
SCGCQ02113833	MR7.10 cli return mesg. typo after ctrl restart then immediately running storcli64  /c0 show.
SCGCQ02124246	Storcli: /c0 compare help lists /c0/px compare command.
SCGCQ02124675	Aero DBU PA4 : Redundant information is displayed for set driveactivityled command in storclif.
SCGCQ02136333	Configuring multiple lane speed is working only for fisrt ID, Rest were ignored
SCGCQ02141931	Storcli: "completeflash" is listed in Windows help file.
SCGCQ02101432	Instance Validation Failed for "/call show and /call show all".
SCGCQ02101513	Instance Validation Failed bw "drive-group-detailed-schema.json" and "/call/dall show all".
SCGCQ02139910	Storcli: Improper spacing for the linkspeed description and "YY" parameter leads to confusion.
SCGCQ02140859	Aero (DBU PA5):Storcli: No description of patrolread "OFF" and optional is mentioned as {}.
SCGCQ02140878	Storcli: Force option not mentioned in "/cx/dx add mirror" and "/cx/vx start init" command.
SCGCQ02101568	Storcli: Instance Validation Fails for vd-bootdrive-schema.json and vd-unmap-schema.json.
SCGCQ02101570	Aero_storecli:Using latest storecli firmware download fail with noreset option.
SCGCQ02113123	Aero DBU PA4 : Syntax error is seen for the command - storclio.efi /cx/px set state ?
SCGCQ02169242	Phyreset Fails on IT controllers
SCGCQ02170389	Unsupported Drive State is Displayed for "./storcli /c0 show" Command
SCGCQ02121017	CLI is returning "success" when attempting to set bios mode to Ignore Errors.
SCGCQ02097641	Storcli displays grammatically incorrect message in detailed help file.
SCGCQ02101572	MR_7.10: Storcli: Property is shown as SCSI Umap instead of SCSI Unmap.
SCGCQ02113262	Storcli: /c0 show detailed command does not list /cx/px show phyerrorcounters and /cx show vpd.
SCGCQ02113511	Aero (DBU PA4):Storcli: Incorrect description of "/c0/v0 show migrate" command.
SCGCQ02124252	Wrong reference of "page=[X]" as part of syntax error message.
SCGCQ02136689	Storcli: /c0 set ? lists bbu,mx,px and lnx commands.
SCGCQ02053667	API changes for NVMe speed and width changes
SCGCQ02173513	Create an event for DDF config clear failed event.
SCGCQ02157359	Snap Dump ClearAll Method logging event
SCGCQ02149380	API changes for a better presentation of Atlas to tools
SCGCQ02137048	Adding NVACHE messages indicate when SLC format has started and completed.
SCGCQ02125252	Add disableOffloadNum field in MR_SNAPDUMP_PROPERTIES struct
SCGCQ02053671	API changes for linkconfig interface
SCGCQ02066380	security key passed in from storcli command to be read from user given file
SCGCQ02078649	Support FMP Images in UEFI Version of PERCCli
SCGCQ02115017	Unmap error message changes as per new description in MR API
SCGCQ02125486	StorCLI: Modification of debug logging mechanism
SCGCQ02127226	StorCLI LibMods: Modification of debug logging mechanism in LibMods
SCGCQ02158611	MPI 2.6: Header file changes associated with Revision 2.6.9 of the specification
SCGCQ02150637	Add new topology device type for Atlas switch
SCGCQ02132334	MR API: Add support bits for currentSpeed and clkMode
SCGCQ02066386	MR: 64 Bit  Utilities/Application to Support VMWARE ESXi 6.7+
SCGCQ02074657	SAS 3_5 Ventura family UEFI NVMe drive serial number issue
SCGCQ02066395	Return pended IOCTLS that was not completed after some numbers of OCRs had been initiated.
SCGCQ02066399	Return pended IOCTLS that was not completed after some numbers of OCRs had been initiated.
SCGCQ02082612	Request to support StorCLI & LSA for Valvano 28i (MR+Cub) and Custom Form Factor (
SCGCQ02124566	Add displaying list of enclosures in controller show and show all command
SCGCQ02160016	Support in storCLI support PD firmware download for 3008IR/3008IT controllers
SCGCQ02085102	LibMod changes : MR: 64 Bit  Utilities/Application to Support VMWARE ESXi 6.7+


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.




Component:
=========
SAS MegaRAID StorCLI
Release Date: 6/04/19


Version Numbers:	StorCLI
===============		===========
Current Version		007.1017.0000.0000		
Previous Version	007.0913.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ01977443	Incorrect colinfo output of Bad block count
SCGCQ01978824	StorCLI hangs when viewing controller in FreeBSD (MR7.8 is okay)
SCGCQ01979483	Unified StorCLI : Enclosure devices are part of drive list used for drive operations
SCGCQ01985587	StorCLI show output shows Legends as BBU instead of EnergyPack.
SCGCQ01985815	storcli faults for enclosure show command
SCGCQ01988329	Shenandoah:StorCLI:Right click properties for released binary shown blank.
SCGCQ01988402	Migrate Failure case is not Branding compliant
SCGCQ01990060	Unable to switch to eHBA mode using a H745P Adapter
SCGCQ02006374	MR7.10_PA1: Storcli binaries for RHEL/SLES OS is not present for ARM
SCGCQ02009852	NVMe drive displays incorrect information with IT card
SCGCQ02012025	Storclio (007.0911.0000.0000) detailed help file  doesn't have " locale " option  for flashing FW in Dual/Active & Backup mode.
SCGCQ02016762	MR_7.10_Storcli: Instance Validation Failed between "controller-personality-schema.json" and "set personality" JSON output.
SCGCQ02018073	MR_7.10_Storcli: No "schema and command" mapping details in Schema_mapping_list.xlsx file for snapdump commands.
SCGCQ02018134	MR_7.10_Storcli: No schema file for controller sesmultipathcfg commands.
SCGCQ02018135	MR_7.10_Storcli: No "schema and command" mapping details in Schema_mapping_list.xlsx file for drive jbod commands.
SCGCQ02018140	MR_7.10_Storcli: No "schema and command" mapping details in Schema_mapping_list.xlsx file for "/cx get vpd" commands.
SCGCQ02018333	MR_7.10_Storcli: Instance Validation Failed between "virtual-drive-detailed-schema.json" and "/call/vall show all "
SCGCQ02019740	MR_7.10_Storcli: bbu-show-modes-schema.json file is not in JSON format.
SCGCQ02019746	Instance Validation Failed between " controller-lane-show-schema.json" and "/call/lnall show"
SCGCQ02021398	retentiontest command is successfully triggering BBU test on Shenandoah controller
SCGCQ02024065	Pending Image details are not populated after FW upgrade and downgrade.
SCGCQ02032911	Instance Validation Failed between "controller-detailed-properties-schema.json" and "/call show all "
SCGCQ02034493	MR_7.10_Storcli: Add VD command output is not in JSON format.
SCGCQ02035152	FW flash fails to load the latest image after upgrade downgrade with resetnow option
SCGCQ02035370	Instance Validation Failed between "vd-unmap-schema.json" and "/call/vall show unmap"
SCGCQ02041094	ROP version not displayed with latest ROP version SCGCQ02035462
SCGCQ02045324	"Run time to empty" field showing as "Battery is not being charged" when the battery is being charged.
SCGCQ02053910	remove the maxconcurrentpd check from storcli and report fw returned failure
SCGCQ02061340	Storcli: "resume migrate" command does not show syntax error.
SCGCQ02062957	Instance Validation Failed between "controller-detailed-properties-schema.json" and "show_all"
SCGCQ02064836	Show Snapdump help command lists delete snapdump details as well.
SCGCQ02064839	Storcli: "show config" command shown as Un-supported.
SCGCQ02065691	PH11 Alpha - StorCLI 'show file' command throws segmentation fault for complete flash image in FreeBSD
SCGCQ02065695	OEM: storcli crashes during show command when DGs present
SCGCQ02065698	Storcli: No schema files for htbparams commands.
SCGCQ02065734	"Delete snapdump" command shows same description "Snapdump clear" for success and failure case.
SCGCQ02067575	Incorrect error message displayed while creating R10 VD when no free space available.
SCGCQ02069817	Schema file updates for controller show all output change for defect SCGCQ02048150
SCGCQ02070951	Typo in storcli /c0 set linkspeed help
SCGCQ02072746	Aero (DBU PA2): Storcli: No syntax error displayed for "storcli mronly" command.
SCGCQ02076923	Wide port info is not displayed under connector name for Backplane attached drives.
SCGCQ02076931	Empty data is listed when we query for show linkconfig
SCGCQ02077156	htbparams help output needs update.
SCGCQ02078437	show/set lane speed shows success when we are in SAS profile
SCGCQ02078513	Libmods: show.set lane speed shows success with wrong data when we are in SAS profile
SCGCQ02081415	Recon command (./storcli /cx set recon) is throwing syntax error.
SCGCQ02082142	storcli /c0/ex/s23,24 show patrol read doesnt not show error for slot 24 (Invalid Slot).
SCGCQ02082303	Aero (DBU PA2): Storcli show detailed help does not list "show all " command.
SCGCQ02082460	Aero (DBU PA2): Storcli: Get rttdump detailed help shows syntax error.
SCGCQ02083828	Storcli: Incorrect message while executing "storcli64.exe /c0/v0 del discardcache"
SCGCQ02084549	Failure status for /call/sall and /call/eall/sall command.
SCGCQ02084966	CLI returns wrong error code upon failure
SCGCQ02089892	Storcli: Error in /c0/f0 command output.
SCGCQ02090770	StorCLI listing PD Slot Status as "Incorrect Status Value" for configured PD's
SCGCQ02091548	Storcli doesn't exit with controller status message after doing OFU.
SCGCQ02096774	Libmod changes for SCGCQ02090770
SCGCQ02097647	Aero (DBU PA3): Storcli: FW hits Megamon while executing storcli in EFI shell when EFI Driver is unloaded.
SCGCQ02114332	CLI returns "success" when attempting to change the H840 controler to eHBA personality.
SCGCQ02116380	CLI returns "success" when attempting to set DS3 or DS4 to enabled
SCGCQ02117749	StorCLI crashes for 'storcli J command
SCGCQ02124508	Storcli:  VD legend is missing in "/call/vall show expansion" command.
SCGCQ01985463	Unified StorCLI : Help command of "Get flash" is not shown in generic help syntax
SCGCQ01985589	Snapdump unsupported commands for OEM needs to be disabled
SCGCQ01985595	Output message to Snapdump get command to display "Download Support Log" info to allign with Single click
SCGCQ01985665	Unified StorCLI : Removal of dead code from command processor manager
SCGCQ01993722	Aero A0 UTP: StorCLI snapdump command needs to clarify new "On Demand" snapdump option
SCGCQ01996444	Aero: Segmentation Fault in storcli /c0 show all
SCGCQ02006450	Storcli throws an 'Incomplete foreign configuration' error when there is no enclosure connected
SCGCQ02007152	storcli gives error when the lane configuration is set as X8
SCGCQ02016749	MR_7.10_Storcli: No schema file for controller unmap commands.
SCGCQ02016765	MR_7.10_Storcli: Instance Validation Failed "controller-restorehotspareoninsertion-schema" and "set restorehotspare"
SCGCQ02016768	MR_7.10_Storcli: Instance Validation Failed "controller-properties-schema" and "/c0 show"
SCGCQ02016771	MR_7.10_Storcli: controller-detailed-properties-schema.json or "/call show all " output not in JSON format
SCGCQ02016798	VD legend  missing in the legend for Foreign config show all output
SCGCQ02018227	MR_7.10_Storcli: Instance Validation Failed between "controller-autoconfig-schema.json" and "show autoconfig" JSON output.
SCGCQ02018277	MR_7.10_Storcli: Instance Validation Failed between "controller-linkconfig-schema.json" and "show linkconfig" JSON output.
SCGCQ02018305	MR_7.10_Storcli: Instance Validation Failed between "controller-profile-schema.json" and "show profile" JSON output.
SCGCQ02018313	MR_7.10_Storcli: Instance Validation Failed between "system-schema.json" and "./storcli show" and "show all" JSON output.
SCGCQ02018327	MR_7.10_Storcli: Instance Validation Failed between "enclosure-drive-detailed-schema.json" and "/call/eall/sall show all"
SCGCQ02019729	MR_7.10_Storcli: Instance Validation Failed between "cache-vault-detailed-schema.json" and "/call/cv show all "
SCGCQ02031615	Storcli displays drive state as UBad instead of UBad (unsupported)
SCGCQ02040779	Instance Validation Failed between "drive-group-hidden-schema" and "/c1/dall set hidden" & "set security"
SCGCQ02043601	Fixing coverity issues Fixing resource leaks
SCGCQ02047109	Storcli help file should show the expand size format.
SCGCQ02050586	Updating the storcli schema mapping document
SCGCQ02053030	PH11 Alpha - StorCLI - Parse error observed for command 'StorCLI J' while validating Jason
SCGCQ02053914	JSON-SCHEMA : IT-Controller Json-schema validation erros in MR_SAS_Unified_StorCLI_7.10
SCGCQ02060276	Aero: Storcli : Storcli crashed when  Firmware upgrade tried on Sea controller
SCGCQ02061328	Aero (DBU PA2): Storcli: JSON readme file does not have complete VD and PD support list.
SCGCQ02062958	Instance Validation Failed bw "enclosure-drive-detailed-schema.json" & "/call/eall/sall show all"
SCGCQ02063932	PH11 Alpha - StorCLI - Compare linkspeed command failed for 6Gbps link
SCGCQ02065513	Grammatical error in Perccli message
SCGCQ02065581	Invalid aero controllers are not displayed with apt message in driver less mode
SCGCQ02067616	STORCLI: Show command output having wrong legend for Slt for oem Hercules
SCGCQ02072448	Storcli connector display not matching with Aero board 9560-16i.
SCGCQ02075242	storclif.exe /c0/ex/sx show poh should show proper message during command execution.
SCGCQ02078507	VD reference in  set JBOD command output message
SCGCQ02082208	Aero (DBU PA2): Storcli: /cx/mx command does not mention about "Auto" settings.
SCGCQ02083822	Storcli: Force is mentioned as optional in snapdump delete command.
SCGCQ02083992	StorCLI:VD reference in Delete preserved cahce command output -Branding
SCGCQ02084752	Help of /cx/px compare command needs update and /cx/px reset ? shows syntax error.
SCGCQ02086726	StorCLI: Delete config failure message need correction
SCGCQ02100491	No proper legends in /fall output.
SCGCQ02101558	Aero (DBU PA3): Storcli: Incorrect schema mapping for "/cx set  autoconfig " command.
SCGCQ02113241	Storcli: OCR helps needs update.
SCGCQ02113358	Storcli: No proper description of set and show sesmultipathcfg.
SCGCQ02116806	StorCLI: File sync issue with rel and dev stream for MR 7.10
SCGCQ02125408	Perccli does not enable Power Save mode for UG & HS type 1 & type 2.
SCGCQ01967488	Storcli shows wrong PD list sequence.
SCGCQ01986831	securesed autoconfig param should not be present for perccli help
SCGCQ01998330	spell mistake in start diag operation failure
SCGCQ02018137	MR_7.10_Storcli: No "schema and command" mapping details in Schema_mapping_list.xlsx file for /cx/px commands.
SCGCQ02018322	MR_7.10_Storcli: Instance Validation Failed between "enclosure-schema.json" and "/call/eall show" JSON output.
SCGCQ02024327	MR_7.10_Storcli: Instance Validation Failed between "foreign-configuration-schema.json" and "/call/fall show"
SCGCQ02034064	Aero UTP: storclif /call show commands output contains "Count 4 exceeded for token id #"
SCGCQ02034490	Aero IT - PA1 - StorCLI - BIOS verion not displayed with flash file using 'show file' command
SCGCQ02040640	failure in StorCLI enclosure show status
SCGCQ02042106	unmap attribute is not mentioned in help file command "add vd each r0".
SCGCQ02043610	Incorrect status displayed for pause rebuild command.
SCGCQ02044777	PH11 PA - StorCLI - Segmentation fault seen when 'compare linkspeed' executed on Fury C0 board
SCGCQ02048660	Drive Groups is shown instead of arrays in show all command
SCGCQ02053070	Port information is not displayed for Vses Backplane
SCGCQ02053639	"c0 delete ?"  does not list snapdump command.
SCGCQ02062834	Incorrect status displayed for resume copyback command.
SCGCQ02062960	Aero (DBU PA2): Storcli: Instance Validation Failed bw "vd-operations-migrate-schema.json" & "start_migrate"
SCGCQ02064795	Aero (DBU PA2): Storcli: Result shows blank for "resume patrolread" failure case.
SCGCQ02070797	Fail to set the linkconfig .
SCGCQ02070953	Storcli /c2 set linkconfig conname=c0,c1 configid=14 returns invalid syntax error
SCGCQ02073046	output information for link configuration is displayed incorrectly
SCGCQ02077085	Aero DBU PA2 : Syntax error is seen in storcli /cx(x|all) show ASO.
SCGCQ02077175	Aero (DBU PA2): Storcli: Syntax error for "/c0 download psoc/efibios/cpld/fcode ?" download commands.
SCGCQ02078409	Storcli throws different error messages for  show status command in  Ventura and Aero
SCGCQ02078936	StorCLI: VD listing for c0 show and vall show is toggled
SCGCQ02082949	Incorrect string displayed in show command in FreeBSD OS
SCGCQ02083991	Shenandoah_StorCLI:VD reference in CLI outout for Firmware update command failure case
SCGCQ02085630	MR_7.10_Storcli: "storcli show file=filepath" command shows failure status.
SCGCQ02086669	PCI Linkconfig configid status is failure, even though it was set
SCGCQ02089427	Storecli_Aero: Using latest storecli show file command "Aero-DVT -HBA 9500-16e" board  output version number shows wrong.
SCGCQ02089862	Libmods changes for defect SCGCQ02062957
SCGCQ02091155	Help update for "add vd cachevd" command as Normal VD is created with failure status.
SCGCQ02106218	Preserved cache help file shows a mismatch in command and the convention.
SCGCQ02113377	Aero DBU PA4 : Storcli doesn't show the convention details properly for storclio /cx/px show command
SCGCQ02113506	Aero (DBU PA4):Storcli: Syntax error for /c0 show AliLog ?
SCGCQ01979599	Expander FW download using  storecli utility crashs.
SCGCQ01992087	Smart Carrier Enclosure port info shown as "Multuipath"
SCGCQ01992461	MR_7.9: Storcli reported unknown OS for Windows 10 RS5  LTSC.
SCGCQ01998332	perccli /c0 show all lists topology without any DG's present
SCGCQ02016701	MR_7.10_Storcli: Junk character in error message while creating SED vd with regular HDD drives.
SCGCQ02018097	MR_7.10_Storcli: Incorrect command syntax mentioned in Schema_mapping_list.xlsx file for "/cx set autoconfig" command.
SCGCQ02021393	Controller health status is shown as optimal  when megacell cable is disconnected.
SCGCQ02035551	Instance Validation Failed between "vd-operations-bgi-schema.json" and "/call/v1 show bgi " and "show init".
SCGCQ02045816	Storcli shows incorrect output for delete events command
SCGCQ02048150	BreakMirror RAID Support coming as Yes, even when Breakmirror is not supported
SCGCQ02053923	Spell mistake on support ondemand snapdump property of show all output
SCGCQ02057361	StorCLI displays expansion as successful even when there is no free space to expand
SCGCQ02062942	Instance Validation Failed between "controller-patrolread-schema.json" and "/call resume patrolread"
SCGCQ02063689	PH11 Alpha - StorCLI - 'show file' command displays incorrect message after reading uploaded bios file
SCGCQ02064120	Need a space between atleast with StorCLI error message "Unmap is not supported atleast on one device"
SCGCQ02064828	Storcli:"resource already in use" error message displayed when trying to create VD with one UG and one UBUnsp.
SCGCQ02073042	Multiple status messages are displayed in the output
SCGCQ02082196	Aero (DBU PA2): Storcli: Inconsistency in "add vd" command syntax.
SCGCQ02100905	Details are displayed twice in "/cx/bbu start ? "
SCGCQ02101095	Device Type for non-UBM backplanes are being shown as Enclosure instead of Backplane
SCGCQ02113353	Storcli: set termlog shows [=on|off] mentioned as optional.
SCGCQ02119091	Aero (DBU PA4):Storcli: Typo in /c0 add vd detailed help.
SCGCQ00804672	Non-array delete for objects: destructors will not be called for objects in the array leading to unexpected behaviour.
SCGCQ01978978	LD size not shown in GiB format in foreign import preview
SCGCQ01985592	Storcli shows BBU present instead of EnergyPAck in HWcfg for StorCLI /cx show all output.
SCGCQ02008219	Aero:Storcli: Adaptertype shown as UNKNOWN(X0)  for Sea (3816_Eval) IT Controller
SCGCQ02008676	iMR Changing profileid's using cli results in Status=Success Description=None
SCGCQ02018078	MR_7.10_Storcli: No "schema and command" mapping details in Schema_mapping_list.xlsx file for errorcounters commands.
SCGCQ02030652	Storcli reported "Boot Volume Supported = NO" eventhough ctrl boot with OS on vd.
SCGCQ02040645	There is no error message for smart drive failure command.
SCGCQ02046036	Storcli help file doesn't show recon rate command instead it shows migrate rate.
SCGCQ02048612	Topology information missing from Storcli output
SCGCQ02057360	JSON Schema : Updating the schema list with Virtual drive command set
SCGCQ02057699	storecli_Aero:In linux error message observed in the show output.
SCGCQ02061305	Checking in JSON schemas
SCGCQ02094970	Junck character displayed in Virtual SES phy id, when we query phyerror counter for enclosure.
SCGCQ02100896	Aero (DBU PA3):Storcli: Help of /cx/px reset does not mention about option hard reset.
SCGCQ02100915	BBU show detailed help does not list "show learn " command.
SCGCQ02101564	Storcli: Instance Validation Fails for all /call/e65/sall commands where "e65 is not found".
SCGCQ02113484	Storcli: Remove Nytro supported options in "/cx [start] flush|flushcache [cachecade  | ALL]" help.
SCGCQ02113833	MR7.10 cli return mesg. typo after ctrl restart then immediately running storcli64  /c0 show.
SCGCQ02122169	Percli returns invalid arguments" when trying to create a VD using some PDs already configured in a VD and some U
SCGCQ02124246	Storcli: /c0 compare help lists /c0/px compare command.
SCGCQ00690355	Storcli shows two controllers in the system though you have only one cotntroller in the system.
SCGCQ01976928	VD/DG Reference in the  legend for Foreign config show command
SCGCQ01993282	WBSup abbreviation defined twice when running perccli /cX show profile
SCGCQ02016758	MR_7.10_Storcli: unmap attribute is not mentioned in "/c0 add vd" command syntax in Schema_mapping_list.xlsx file.
SCGCQ02024740	Storcli pop-up a message "controller not found" during chip reset , rather than controller busy.
SCGCQ02034471	"Invalid RAID level" error message while creating R10 VD.
SCGCQ02035437	MR_7.10_Storcli: Instance Validation Failed between "controller-patrolread-schema.json" and "/call pause patrolread"
SCGCQ02101432	Instance Validation Failed for "/call show and /call show all".
SCGCQ02101513	Instance Validation Failed bw "drive-group-detailed-schema.json" and "/call/dall show all".
SCGCQ01998328	perccli show profile lists personality as JBOD instead of eHBA
SCGCQ02035439	Aero DBU PA1:Storcli: Instance Validation Failed "controller-properties-schema" and "/call show" command.
SCGCQ02042242	Fixing coverity issues Fixing resource leaks and explicit NULL dereferencings
SCGCQ02042513	Unified StorCLI : Fixing resource leaks - Part 1
SCGCQ02053643	Autoconfig options are allowed to set with latest storcli
SCGCQ02057434	Updating Schema mapping doc and fixing validation errors
SCGCQ02101568	Storcli: Instance Validation Fails for vd-bootdrive-schema.json and vd-unmap-schema.json.
SCGCQ02101570	Aero_storecli:Using latest storecli firmware download fail with noreset option.
SCGCQ02113123	Aero DBU PA4 : Syntax error is seen for the command - storclio.efi /cx/px set state ?
SCGCQ02021194	Aero:Storcli: Adaptertype shown as UNKNOWN(X0)  for Aero (3916_Eval) IT Controller
SCGCQ02040756	Instance Validation Failed between "drive-group-schema.json" and "/call/dall show " and /call/dall show all
SCGCQ02042296	PH11 PA Storcli: Incorrect error message shown while programming invalid sasaddress
SCGCQ02047100	Unified StorCLI : Individual SL_INIT_LIB calls are made for every SL command invocation
SCGCQ02056199	Updating storcli-cmd-list.xlsx for Drives
SCGCQ02057085	Message with Incorrect controller object is displayed while setting SSD Caching on VD
SCGCQ02097641	Storcli displays grammatically incorrect message in detailed help file.
SCGCQ02101572	MR_7.10: Storcli: Property is shown as SCSI Umap instead of SCSI Unmap.
SCGCQ02113262	Storcli: /c0 show detailed command does not list /cx/px show phyerrorcounters and /cx show vpd.
SCGCQ02113511	Aero (DBU PA4):Storcli: Incorrect description of "/c0/v0 show migrate" command.
SCGCQ02121017	CLI is returning "success" when attempting to set bios mode to Ignore Errors.
SCGCQ02124252	Wrong reference of "page=[X]" as part of syntax error message.
SCGCQ01991840	MPI 2.6: Associated header changes for MPI 2.6.8 release.
SCGCQ02111563	Better error message for certain unmap operations
SCGCQ02103973	Add MFI STAT and MR Event for Secure Boot indicating fw dl was not allowed due to an existing pending key change
SCGCQ02103183	MR Windows IOCTL Error codes to Application added to MR API
SCGCQ02079068	Increase in MR_PD_INFO.name length to 32 characters
SCGCQ02037158	API change to support new DCMD for consolidated device list
SCGCQ02035295	API change to support NVMe Passthrough over OOB
SCGCQ02033538	Additional details about spare
SCGCQ02030653	Modification in  MR_SNAPDUMP_TRIGGER_TYPE enum value
SCGCQ02018345	Add error code SL_ERR_UNSUPPORTED_FLASH_TYPE
SCGCQ02016723	API change to support new DCMD for consolidated device list
SCGCQ02013675	Reword event log messages as it creates unnecessary panic.
SCGCQ02006657	Add new MFI Fault sub code for Secure Boot Preboot Auth failure
SCGCQ02000566	Customer needs to generate and extract the On-demand based debug data both for MR and iMR.
SCGCQ01973690	Aero / Sea : Unified StorCLI uEFI workaround for HW Bug SCGCQ01962141
SCGCQ01940661	Add New Generic OOB API To Read  ROC Temp, Drive Temp, Drive Type, Drive Protocol and status through OOB BMC
SCGCQ01929656	OEM request to add to show smart info of sas drive for "StorCLI /cx/ex/sx show smart" command
SCGCQ01979597	MR_SAS_Unified_Libmods_7.10 OEM request to add to show smart info of sas drive for "StorCLI /cx/ex/sx show smart" command
SCGCQ01992779	Post firmware trace buffer at the time of driver load
SCGCQ02008407	Adding the spare details in the same volume creation (CONFIG_ADD DCMD)
SCGCQ02072160	PSoC implementation in StorCLI by parsing PSoC image
SCGCQ01301689	Storelibconfit.ini file changes
SCGCQ01960420	Disabling RAID00 support
SCGCQ02067300	Add support to display PSOC version for Ventura IT controllers
SCGCQ02008403	Adding the spare details in the same volume creation (CONFIG_ADD DCMD)
SCGCQ01973962	Aero / Sea : LibMod changes - Unified StorCLI uEFI workaround for HW Bug SCGCQ01962141
SCGCQ01583214	Add ability to field upgrade PSOC on HBA boards
SCGCQ01960287	DUal Image SUpport


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.



Component:
=========
SAS MegaRAID StorCLI
Release Date: 3/20/19


Version Numbers:	StorCLI
===============		===========
Current Version		007.0913.0000.0000		
Previous Version	007.0813.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ01897463 - hot spare reference in Add Spare command output  
SCGCQ01929191 - :Strocli show all output return failure but generates output  
SCGCQ01932770 - Junk message "STR_JBOD_OBJ" is displayed in the output of storcli /c0 show JBOD command.  
SCGCQ01936811 - StorCLI: No legend presend for VD Delete Failure
SCGCQ01940291 - StorCLI:Setting Unmap=OFF gives success for a LD when unmap is not supported and not enabled on that LD
SCGCQ01940296 - Set WrCache= WB ,says success even though VD is in WT.Proper warning message should be given to the user  
SCGCQ01940347 - Legend missing for LD BGI resume/pause commands
SCGCQ01945551 - System hangs while creating VD in EFI shell.  
SCGCQ01956276 - CLI is showing the incorrect OS version
SCGCQ01956678 - Unified StorCLI : Add extra space to CBB header  
SCGCQ01960322 - PH10 Alpha - StorCLI throws "0 Failed 32782 Failed to get PD Info" when /c0 show executed in EFI  
SCGCQ01961527 - JBOD list is not showing in order when using /cx show
SCGCQ01965370 - supported personalities has blank value
SCGCQ01977443 - Incorrect colinfo output of Bad block count  
SCGCQ01978824 - StorCLI hangs when viewing controller in FreeBSD (MR7.8 is okay)  
SCGCQ01979483 - Unified StorCLI : Enclosure devices are part of drive list used for drive operations
SCGCQ01985587 - StorCLI show output shows Legends as BBU instead of EnergyPack.  
SCGCQ01988329 - :StorCLI:Right click properties for released binary shown blank.  
SCGCQ01988402 - Migrate Failure case is not Branding compliant  
SCGCQ01990060 - Unable to switch to eHBA mode using Adapter  
SCGCQ01897468 - Transformation is coming as Reconstruction , while migrating the Raid 1 to Raid 5 .  
SCGCQ01898853 - Mis-spelled words in StorCli's Help
SCGCQ01905019 - Hot spare reference in storcli.exe /cx/ex/sx show all command output  
SCGCQ01905077 - Reference to VD in storcli.exe /c1/jbodall delete command output  
SCGCQ01924504 - Fixing coverity issues Removing dead code and Out of bound access
SCGCQ01936887 - StorCLI: HotSpare reference in Add VD Command output  
SCGCQ01940290 - storcli /c0 show events output not listing the Event ID's
SCGCQ01940437 - StorCLI:Hot spare reference in storcli64 /cx show/set restorehotspare command outputs
SCGCQ01955069 - StorCLI: Storcli crashes on checking LD preserved cache info
SCGCQ01955167 - StorCLI:Drive Group reference in Add dedicated spared drive command in CLI  
SCGCQ01957949 - Intel NVMe drive "Model Number" displayed incorrect under Device Attributes
SCGCQ01985463 - Unified StorCLI : Help command of "Get flash" is not shown in generic help syntax
SCGCQ01985589 - Snapdump unsupported commands for  needs to be disabled
SCGCQ01985595 - Output message to Snapdump get command to display "Download Support Log" info to allign with Single click
SCGCQ01985665 - Unified StorCLI : Removal of dead code from command processor manager  
SCGCQ01993722 - Aero A0 UTP: StorCLI snapdump command needs to clarify new "On Demand" snapdump option
SCGCQ01581843 - Legacy messages present with create and rekey of securitykey on controller  
SCGCQ01891583 - Adding debug logs to Mfi files
SCGCQ01919830 - MR7.8_Storcli: Storcli fails to install on ARM server with Missing Maintainer message
SCGCQ01921258 - StorCLI show SAS address for NVMe drives
SCGCQ01925503 - Unified StorCLI 7.9 : Fixing coverity issues - Dead code,resource leaks,and memory corruption - Part 1
SCGCQ01932035 - Incorrect help option for set autoconfig in StorCli's Help
SCGCQ01932177 - Unmap enabled property is shown in VD detailed properties when controller does not support unmap
SCGCQ01963738 - Unified StorCLI - Aero : "FullFlashImage" environmental variable component stamp change
SCGCQ01967488 - Storcli shows wrong PD list sequence.  
SCGCQ01986831 - securesed autoconfig param should not be present for perccli help
SCGCQ01998330 - spell mistake in start diag operation failure
SCGCQ01889700 - Storcli, should fail the command "get snapdump id=0 file=snapdump.zip norttdump"
SCGCQ01905831 - :32 Binary crashes on giving invalid input to the command storcli.exe /c0/jbod0 show
SCGCQ01923119 - For NVMe drive use the term NVMe instead of PCIe
SCGCQ01927864 - PD show all command displays SSD weargauge details , which is not required.  
SCGCQ01979599 - Expander FW download using storecli utility crashs.  
SCGCQ01992087 - Smart Carrier Enclosure port info shown as "Multuipath"
SCGCQ01992461 - MR_7.9: Storcli reported unknown OS for Windows 10 RS5 LTSC.  
SCGCQ01998332 - perccli /c0 show all lists topology without any DG's present  
SCGCQ01925156 - Unified StorCLI: StorCLI does not return the return code from SLIT/SLIR3 to explorer/command processors
SCGCQ01940333 - Virtual drive reference in Delete Preserved cache command output  
SCGCQ01940805 - Storcli not working on large config setup when some of the drives are missing or the system has foreign config.  
SCGCQ01948579 - Unified StorCLI : Drive after the enclosure is not displayed as part of /eall/sall show [all] command
SCGCQ01958564 - Firmware receives incorrect erase type for sanitize crypto erase option
SCGCQ01978978 - LD size not shown in GiB format in foreign import preview
SCGCQ02008676 - iMR Changing profileid's using cli results in Status=Success Description=None
SCGCQ01937259 - Hide BBU details from the command "storcli /c0 show alilog" 
SCGCQ01965366 - Disk group is displayed instead of array on  platforms
SCGCQ01976928 - VD/DG Reference in the legend for Foreign config show command
SCGCQ01993282 - WBSup abbreviation defined twice when running perccli /cX show profile
SCGCQ01942200 - Unified StorCLI Phase 10 : Image checksum should not be performed for aero images
SCGCQ01998328 - perccli show profile lists personality as JBOD instead of eHBA
SCGCQ01892288 - Storcli issuing 'add jbod drives=all' causes storcli to crash
SCGCQ01901166 - Initialize the MFG structure
SCGCQ01891451 - Changes for disable least latency mode
SCGCQ01901158 - snapdump support for host initiated snapdump
SCGCQ01927541 - show complete Serial Number and Model Name for NVMe drive
SCGCQ01940030 - Unified StorCLI : Adding component level download functionality to StorCLI  
SCGCQ01944500 - Adding support bit check for delete snap dump
SCGCQ01949495 - Added Windows compiler security flags (SDL and control flow guard)  
SCGCQ01965721 - Add CTRL_SB_SOFT_SECURE_MODE event to indicate soft secure mode
SCGCQ01973690 - Aero / Sea : Unified StorCLI uEFI workaround for HW Bug SCGCQ01962141
SCGCQ01985474 - Introduced new controller bit  
SCGCQ02002119 - Driver parameter bit for support of tool box cmd
SCGCQ01891513 - Unified CLI - Command processor changes for handling invalid/tampered device id's for sea IT controllers
SCGCQ01919655 - show complete Serial Number and Model Name for NVMe drive
SCGCQ01921241 - API changes for Lane Margining
SCGCQ01927538 - show complete Serial Number and Model Name for NVMe drive connected to IT controller  
SCGCQ01927551 - Unified StorCLI : Allow SBR/SPD read and write using new CBB+SBR concatenated image
SCGCQ01949503 - Added Windows compiler security flags (SDL and control flow guard)  
SCGCQ01962294 - Unified StorCLI : ARM Windows support to StorCLI  
SCGCQ01963208 - Unified StorCLI : ARM64 Windows support to StorCLI - LibMod changes
SCGCQ01891442 - Changes for disable least latency mode
SCGCQ01949521 - Unified StorCLI : PSoC read and write via Device read and write DCMD's in MR Operational case
SCGCQ01891484 - Unified CLI : Handling invalid/tampered controllers for sea controllers
SCGCQ01927595 - Unified StorCLI : Allow erase functionality on operational MR using CBB concatenated image
SCGCQ01973962 - Aero / Sea : LibMod changes - Unified StorCLI uEFI workaround for HW Bug SCGCQ01962141
SCGCQ01631948 - Requesting StorCLIF to read MR FW from flash device and write it to a file. Similar to what IT FW support.  
SCGCQ01960295 - Branding tool  
SCGCQ01917172 - Porting  Shenandoah from Aero to 7.9
SCGCQ01917263 - Libmods: Porting to 7.9
SCGCQ01935699 - Adding specific help for storcli


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.


Component:
=========
SAS MegaRAID StorCLI
Release Date: 1/9/19


Version Numbers:	StorCLI
===============		===========
Current Version		007.0813.0000.0000		
Previous Version	007.0709.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================


SCGCQ01868634 - MPI 2.6: Fix definition of Signature0 field and PSOC download definition
SCGCQ01896537 - MPI 2.6: Fix definition of SGLs in TOOLBOX_LANE_MARGINING_REQUEST
SCGCQ01790130 - Help content for jbodx show unmap is not present
SCGCQ01825048 - JSON schema file for snapdump is not present
SCGCQ01830673 - Coverity : Fixing coverity issues - Resource leaks,Dereference errors,and dead code - Part 1
SCGCQ01830839 - Storcli is not displayed proper failure message on RTTdump command failure.
SCGCQ01844540 - Storcli terminal hang forever for command "get snapdump id=all" and FW keep on print snapdump command
SCGCQ01849454 - IT Firmware concatenated package flashing is not supported in uEFI platform
SCGCQ01849667 - Detailed help for all IT get commands is giving syntax error
SCGCQ01850217 - Error Message on deleting JBOD/EPD prints as "Delete VD Failed "
SCGCQ01850385 - Current Snapdump value exceed the Save count value limit.
SCGCQ01850418 - PH9 PA StorCLI - Tape drive entry not seen at "Requested boot drive" field after set bootdrive on
SCGCQ01851653 - StorCLI enable/disable unmap VDs return status as failed instead of successful
SCGCQ01853444 - State of the tape drive should be displayed as "JBOD" when FW state is MR_PD_STATE_SYSTEM
SCGCQ01855721 - PH9 PA StorCLI - /c0/eall/sal show all gives success message when no drives connected
SCGCQ01856786 - Storcli allows to set the snapdump savecount to Zero.
SCGCQ01857451 - Storclif set factory settings fails with invalid file.
SCGCQ01866458 - snapdump file format to be changed from gz to zip
SCGCQ01867354 - Unified StorCLI : StorCLI doesn't display OS Name for Windows Server 2019 server
SCGCQ01870271 - Remove current unmap property from vd property display
SCGCQ01882557 - StorCLI shows success message when wrong file flashed to PD-FW hit montask on second try
SCGCQ01882581 - MR API - Incorrect value used for MR_DCMD_CTRL_SNAPDUMP_ONDEMAND
SCGCQ01945551 - System hangs while creating VD in EFI shell.
SCGCQ01627548 - Two MCTP error codes in slerrors.h show same offset code 0x7098
SCGCQ01775602 - StorCLI doesn't call SL_EXIT_LIB in VMware environment for MR Controllers
SCGCQ01789089 - LSA see as BP where CLI see as Enclosure (which one is correct)
SCGCQ01803306 - StorCLI enable/disable unmap VDs return status as failed instead of successful
SCGCQ01804198 - MR_7.8: Storcli fails to create Array on Invader board .
SCGCQ01817177 - Fails to set SnapDump savecount.
SCGCQ01817465 - Fails to set user defined value for delayOCR field in the SnampDump
SCGCQ01817855 - Removing the set/show of unmap on JBOD.
SCGCQ01829667 - BIOS Flashing Failure Observed in EFI Storcli and Multiple Tries Causes UART Unresponsive
SCGCQ01841619 - seg fault is seen when when we try to generate CRC errors using megamon
SCGCQ01842918 - Error noted when "/c0 download" performed after erase - SAS3 IR card connected along with Ventura 16i
SCGCQ01851152 - MR_7.8:Segmentation Fault, storcli command firing concurrently with driver load/unload
SCGCQ01857527 - PSOC version is not shown when the show command is issued with package.rom
SCGCQ01870273 - Libmods: Remove current unmap property from vd detailed property display
SCGCQ01873487 - Autoconfig turns off on executing the command : storcli64.exe /c0 set autoconfig securesed=on
SCGCQ01816260 - Libmods Coverity defect fixes for fixing memory leaks
SCGCQ01842592 - Unable to clear COLINFO using StorCLI
SCGCQ01847631 - Tape drive - help usage needs be changed
SCGCQ01882785 - Unified StorCLI Phase 9 : Incorrect status and change in the description when FW returns POR during FW download
SCGCQ01884635 - Adding more debug prints
SCGCQ01919830 - MR7.8_Storcli: Storcli fails to install on ARM server with Missing Maintainer message
SCGCQ01932177 - Unmap enabled property is shown in VD detailed properties when controller does not support unmap
SCGCQ01790167 - Enhance the detailed help for Firmware download and get bios command.
SCGCQ01816457 - CLI Coverity defect fixes for fixing memory leaks and unchecked returns
SCGCQ01832089 - CLI Coverity defect fixes for fixing memory leaks and unchecked returns
SCGCQ01848086 - Missing "NumberOfBadBlocks" and "readEyeTrainingParameters" in COLINFO properties per PR SCGCQ01105868
SCGCQ01884617 - Show/Set autoconfig param for user-configurable showing as OFF where as other applications shows None
SCGCQ01889700 - Storcli, should fail the command "get snapdump id=0 file=snapdump.zip norttdump"
SCGCQ00804672 - Non-array delete for objects: destructors will not be called for objects in the array leading to unexpected behaviour.
SCGCQ00690355 - Storcli shows two controllers in the system though you have only one cotntroller in the system.
SCGCQ01884667 - Adding more debug levels in CLI
SCGCQ01892288 - Storcli issuing 'add jbod drives=all' causes storcli to crash
SCGCQ01727225 - MPI 2.6: Slot Numbering for x2/x4 wide connections to direct attached devices
SCGCQ01889371 - MPI 2.6: Header file changes for MPI 2.6.7 release
SCGCQ01853686 - MPI 2.6: Header file changes for MPI 2.6.5 release
SCGCQ01776310 - Storcli: Libmods changes for Support UNMAP/TRIM/WRITESAME for SAS/SATA PDs with R5/6 configurations
SCGCQ01835657 - Unified StorCLI Merging StorCLI messaging from Aero to 7.8 stream
SCGCQ01842742 - Enhancements to Storcli command syntax for Personality/Profile/Behavioral Mode Mgmt
SCGCQ01848218 - Changing the VMwareOP version scheme to allow easy upgrades
SCGCQ01873296 - Libmods : Handling of aero and sea controllers with Invalid/Tampered device id's
SCGCQ01873417 - Added customer serial number field to MFC Manufacturing 2 structure
SCGCQ01874035 - MR API changes to support EKMS over OOB
SCGCQ01885686 - Add new error code for tampered or invalid controller
SCGCQ01886424 - Interrupt coalsecing setting per group of 8 replies queues (h/w VF registers)
SCGCQ01887495 - [MR 7.8] API change to export "disable least latency mode"
SCGCQ01928254 - Add secure boot key update complete event
SCGCQ01931637 - Add Board Support Package Image Type to MR_IMAGE_TYPE
SCGCQ01946548 - Fix MR_CTRL_INFO to support backward compatibility
SCGCQ01963328 - Add a new log event used whenever the snap dump properties are modified.
SCGCQ01965047 - Add a bit for atomic descriptor capable
SCGCQ01889947 - MPI 2.6: Add new IOCStatus code for "FAILURE"
SCGCQ01883411 - MPI 2.6: Defines in header must be unique in first 32 characters.
SCGCQ01776116 - Storcli: Support UNMAP/TRIM/WRITESAME for SAS/SATA PDs with R5/6 configurations
SCGCQ01873294 - Handling of aero and sea controllers with Invalid/Tampered device id's
SCGCQ01916035 - Support smp passthrough storeliboob (API changes requirement)
SCGCQ01823436 - Libmods: SVT: testability improvement for Cache Offload (COL) to eliminate inconsistent test results.
SCGCQ01836749 - Updating ncurses library from 6.0 to 6.1
SCGCQ01884659 - StorCLI: Supporting combined CBB+SBR image for MR recovery
SCGCQ01301689 - Storelibconfit.ini file changes
SCGCQ01823938 - Storcli: Unmap changes for drive and VD properties.
SCGCQ01833560 - Support UEFI Capsule Images in PERCLI and Unified StorelibIT for HBA345
SCGCQ01855503 - Command processor changes for Secure boot properties feature - SCGCQ01855473
SCGCQ01867314 - EPD-PT behavior changes for Aero to support in RAID personality in any behavior
SCGCQ01823939 - Libmods: Unmap changes for drive and VD properties.
SCGCQ01819564 - testability improvement for Cache Offload (COL) to eliminate inconsistent test results.
SCGCQ01855473 - Adding secure boot properties to unified StorCLI
SCGCQ01865190 - Adding new MFI STAT - MFI_STAT_SECURE_BOOT_KEY_SLOTS_FULL


Component:
=========
SAS MegaRAID StorCLI
Release Date: 9/12/18


Version Numbers:	StorCLI
===============		===========
Current Version		007.0709.0000.0000		
Previous Version	007.0606.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================


SCGCQ01571249 - Instance Validation Failed between "vd-bootdrive-schema.json" and "set bootdrive on" JSON output.
SCGCQ01790130 - Help content for jbodx show unmap is not present
SCGCQ01749849 - Unified StorCLI 7.7 : StorCLI doesn't report failure status when nopad image flashing fails via completeflash command in MR
SCGCQ01727159 - Unified StorCLI 7.7 : StorCLI should allow noreset option when current NVDATA is lesser than the new NVDATA for SAS3.5 IT
SCGCQ01720959 - Unmap property is not displayed for a drive in drive show all command output
SCGCQ01718981 - MR 7.7 - Storcli throws an incorrect error msg while importing foreign config from Raid to JBOD mode.
SCGCQ01718269 - Unified StorCLI 7.7 : Unconfigured BAD drives are not displayed in /c0 show output
SCGCQ01714663 - storclif /c0 start diag type=0, gives syntax error
SCGCQ01687653 - Space need in the output for Deprecated command in storclif64.exe when legacy Cli command is used
SCGCQ01681086 - ModeE drive fw download not working when drive image is more than 32K
SCGCQ01629478 - Fixing coverity issues - Non array deletes - Part 6
SCGCQ01627961 - Fixing coverity issues - Resource leaks - Part 5
SCGCQ01624599 - StorCLI does not display appropriate status as unmap success when unmap is enabled on a VD.
SCGCQ01616369 - Coverity defect fix for itctflash file
SCGCQ01614972 - Spell mistake in error message for hwdev command
SCGCQ01600257 - Coverity defect fixes for Uninitialized Variables, resource leaks
SCGCQ01599473 - BBU-show-schema is not present in the schema mapping list, the list needs to be sorted to remove duplicate commands.
SCGCQ01595442 - UNMAP 7.6 : on querying the vd details in storcli it gives junk characters for OS drive name.
SCGCQ01589618 - Get VPD from MPB region is failure, but overalll status shows success
SCGCQ01579215 - Instance Validation Failed between "enclosure-drive-schema.json" and "/call/e65/sall show" JSON output.
SCGCQ01817855 - Removing the set/show of unmap on JBOD.
SCGCQ01803306 - StorCLI enable/disable unmap VDs return status as failed instead of successful
SCGCQ01775602 - StorCLI doesn't call SL_EXIT_LIB in VMware environment for MR Controller
SCGCQ01761795 - Storcli vib update fails across releases.
SCGCQ01735493 - Storcli does not display the complete enclosure serial number
SCGCQ01734559 - Unified StorCLI Phase 8 : Firmware downgrade should be supported only by StorCLIO for SAS3 IT controllers
SCGCQ01732959 - Unified CLI 7.7 : Fixing coverity issues - Resource leaks,Unused variables,and non-array deletes - Part 1
SCGCQ01731292 - Unified StorCLI Phase 8 : No help section for ForceHCB option
SCGCQ01723226 - IT Fw Download command StorCLI /c0/eall/sall hang
SCGCQ01715025 - StorCLI 7.702 help for SnapDump is not clear
SCGCQ01714356 - Drive Listing Is Not In Order for "/c0 show" & "/c0/eall/sall show"
SCGCQ01713681 - PA2-MR7.7-StorCLI: "storcli /c0/v239 start migrate type=raid0 option=add drives=66:18" gives syntax error
SCGCQ01640825 - Instance Validation Failed "system-schema.json" and "storcli64.exe show all" JSON output.
SCGCQ01627548 - Two MCTP error codes in slerrors.h show same offset code 0x7098
SCGCQ01606830 - Unified LibMods : Coverity fixes for uninitialized variables in File functions - Part 4
SCGCQ01600381 - Unified LibMods : Fixing coverity issues - Resource leaks and Uninitialized variables - Part 2
SCGCQ01588245 - Unified StorCLI 7.6 : Creation of VD aborts StorCLI when FW returns error code for MR_DCMD_CFG_READ DCMD
SCGCQ01749795 - Unified StorCLI Phase 8 : NVMe and SAS Drive's WWN is incorrect for IT Controller
SCGCQ01681089 - Drive download commands help syntax to be updated for IT.
SCGCQ01624605 - Update help contents for jbod delete
SCGCQ01624063 - Unified StorCLI 7.7 : SAS Phyloopback test reports false positive results
SCGCQ01595673 - Json schema for enclosure phyerrorcounters has not been added, output format needs modification.
SCGCQ01595640 - CLI does not report Serial number for Enclosure.
SCGCQ01571287 - Storcli: Instance Validation Failed between "drive-group-detailed-schema.json" and "/call/dall show all" JSON output.
SCGCQ01676983 - Unified StorCLI 7.7 : StorCLI should not issue SL_SET_LIB_PARAMETERS command
SCGCQ01615074 - Drive Fw download Coverity fixes
SCGCQ01600195 - Unified StorCLI 7.7 : Coverity issues - Resource leaks,Uninitialized variables,and dead code - Part 1
SCGCQ01747333 - MR7.7 LSA 4.180.0 enclosure type is not matched with storcli
SCGCQ01732990 - storclio need to support proprietary i2c controller mode.
SCGCQ01606780 - Cutlass Phase 16 Storcli: Partner device ID should be suppressed under ./storcli /c0/eall show for multipath connections
SCGCQ01605182 - Coverity defect fixes for Memory Leak, Uninitialized pointers
SCGCQ01713676 - storcli did not show current profile when connection in invalid config.
SCGCQ01624506 - Unified StorCLI 7.7 : MegaCLI commands report command status code in UEFI environment
SCGCQ01600208 - Coverity libmods issues - Resource leaks and Wrong sizes
SCGCQ01640217 - Unmap support mfc bit and fde type mixing fields needs to be updated when extracting factory settings and also while modifying factory settings
SCGCQ01757433 - Unified StorCLI 7.7 - Fixing coverity issues Resource leaks,Non-array deletes - Part 2
SCGCQ01606785 - Unified CLI : Coverity fixes for Uninitialized variables,resource leaks,and dead code handling - Part 3
SCGCQ01600311 - Resource leaks,Uninitialized variables
SCGCQ01599607 - New configuration params added for EPD-PT devices
SCGCQ01841266 - API Changes for Driver/FW DCMD HandShake
SCGCQ01830211 - RTTrace Enable/Disable API changes
SCGCQ01760512 - Criteo: API changes reversal
SCGCQ01745568 - RTTrace API Changes
SCGCQ01727346 - API changes needed to support eHBA product series
SCGCQ01713708 - Create sanitize events
SCGCQ01628177 - Modify event string APIs for MISSING and OFFLINE LDs
SCGCQ01473897 - Improving SAS bus test coverage by checking PHY error count when linking at 12G speed using a SAS loopback.
SCGCQ01720819 - Switch attached NVMe HW RAID support for Supermicro backplanes
SCGCQ01718946 - Add ForceHCB option in StorCLI for IT controllers
SCGCQ01583217 - Need Storcli support drive FW upgrade
SCGCQ01614689 - NVDATA parameter to OPAL SED
SCGCQ01670135 - Add new MFI Status to block requested operation due to existing controller configuration
SCGCQ01670234 - Change the mr.h API comment showing the new return status for the - MR_DCMD_PD_GET_INFO
SCGCQ01697667 - API change for Switch attached NVMe HW RAID support for Supermicro backplanes
SCGCQ01757538 - Mixing Rules for SED and non-SED drives to create non-secure array with controller security enabled.
SCGCQ01758062 - Unmap: Define new API for enhanced UNMAP support
SCGCQ01762153 - Adding API bit to indicate whether forced personality change is supported or not.
SCGCQ01803319 - Unmap: Define new events for enhanced UNMAP support [MR7.8]
SCGCQ01816724 - Deprecate the snap dump fields that are no longer needed for MR_SNAP_DUMP_PROPERTIES structure
SCGCQ01824135 - Add the API to clear all the snap-dumps from firmware.
SCGCQ01845269 - API change to provide learn complete timestamp
SCGCQ01848759 - Added Support for Triggering SnapDump
SCGCQ01792416 - Add secure boot support
SCGCQ01727113 - UNMAP/TRIM/WRITESAME for NVMe devices for R0/1/EPD/JBOD
SCGCQ01583223 - Add Downgrade Firmware function in Storcli
SCGCQ01593849 - Add support for TCG Opal 2.0 compliant SAS/SATA HDDs, SAS/SATA HDDs operations in StorCLI
SCGCQ01594119 - StorCLI JSON 4.0 compliant schema creation for Phy (including mux and lane) level commands
SCGCQ01797424 - Including The Time Stamp for every Snap Dump created in the firmware.
SCGCQ01798686 - Reporting SSD wear gauge values for OEM specific customers
SCGCQ01853480 - [MR 7.8] API change to return apt failure status for a personality change request
SCGCQ01871912 - Added new events for unmap policy changes
SCGCQ01583226 - Improving SAS bus test coverage by checking PHY error count when linking at 12G speed using a SAS loopback.
SCGCQ01765150 - API Changes - After Vision PSOC FW update, applications should ask the user for power cycle instead of reboot
SCGCQ01615540 - Libmods : Improving SAS bus test coverage by checking PHY error count when linking at 12G speed using a SAS loopback.
SCGCQ01576130 - StorCLI JSON 4.0 compliant schema creation for Enclosure, BBU and CacheVault commands

Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.



Component:
=========
SAS MegaRAID StorCLI
Release Date: 05/30/18


Version Numbers:	StorCLI
===============		===========
Current Version		007.0606.0000.0000		
Previous Version	007.0504.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ01624599 - (Closed) - StorCLI does not display appropriate status as unmap success when unmap is enabled on a VD. 
SCGCQ01595442 - (Closed) - UNMAP 7.6 : on querying the vd details in storcli it gives junk characters for OS drive name. 
SCGCQ01579215 - (Closed) - Instance Validation Failed between "enclosure-drive-schema.json" and "/call/e65/sall show" JSON output. 
SCGCQ01571249 - (Closed) - Instance Validation Failed between "vd-bootdrive-schema.json" and "set bootdrive on" JSON output. 
SCGCQ01561689 - (Closed) - controller show all command is not listing the Battery information
SCGCQ01537017 - (Closed) - "Cached Virtual Drives" displayed in /c0/dall show cachecade without the table. 
SCGCQ01588245 - (Closed) - Unified StorCLI 7.6 : Creation of VD aborts StorCLI when FW returns error code for MR_DCMD_CFG_READ DCMD
SCGCQ01571391 - (Closed) - Instance Validation Failed between "foreign-configuration-schema.json" and "/call/fall show" JSON output. 
SCGCQ01571961 - (Closed) - Instance Validation Failed between "system-schema.json" and "show all" JSON output. 
SCGCQ01606780 - (Closed) - Cutlass Phase 16 Storcli: Partner device ID should be suppressed under ./storcli /c0/eall show for multipath connections
SCGCQ01537255 - (Closed) - Updating the Diag results as per new API changes
SCGCQ01570730 - (Closed) - MPI 2.5: Add MaxEnclosureLevel field to BIOS Page 1
SCGCQ01517431 - (Closed) - Enhance StorCLI show file=<packagefile> to include PnP ID
SCGCQ01553021 - (Closed) - MPI 2.5: Add OEMRD field to SAS Enclosure Page 0.
SCGCQ01571890 - (Port_Complete) - Handle memory leaks in getSortedPdList 
SCGCQ01571939 - (Port_Complete) - Data Abort Exception while entering CTRL R
SCGCQ01571937 - (Port_Complete) - Ctrl-H hang during foreign import along with app tab toggling. 
SCGCQ01540785 - (Port_Complete) - Change in RAID levels displaying in controller show all command
SCGCQ01445612 - (Port_Complete) - Remove sorting logic for array physical drives
SCGCQ01571889 - (Port_Complete) - CacheCade VD association returns error in Config Utility
SCGCQ01568934 - (Port_Complete) - Prepare To Transport


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.




SAS MegaRAID StorCLI
Release Date: 03/05/18


Version Numbers:	StorCLI
===============		===========
Current Version		007.0504.0000.0000		
Previous Version	007.0409.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ01504959 - No JSON-Schema folder in the RO
SCGCQ01492873 - Check for supported pages for firing drive SCSI commands
SCGCQ01500121 - UEFI storcli doesnt see any Ventura controllers
SCGCQ01500315 - Storcli show preservedcache displays incorrect VD size on a missing VD
SCGCQ01499900 - Upgrading the ncurses library from 5.4 to 6.0 in view of security vulnerabilities
SCGCQ01500003 - Programming VPD to MPB regions
SCGCQ01500114 - Controller should not be reset after firmware download in CLI for SAS 3.5 Controllers
SCGCQ01500339 - Storcli may not be able to show the RAID controller in some special situation
SCGCQ01589445 - StorCLI should not display SED property when using IT-HBA
SCGCQ01445308 - Adding JSON schema for JBOD and Drive level commands
SCGCQ01445435 - JSON schema for Drive level commands
SCGCQ01472821 - Instance Validation Failed between "jbod-show-schema.json" and "/c0/jbodx show" JSON.
SCGCQ01472833 - Instance Validation Failed for direct attached drive commands.
SCGCQ01486415 - Spelling errors in the "/cx restart" command.
SCGCQ01488062 - Storcli crashed in Win2016 when "storcli64.exe J" is executed
SCGCQ01489472 - UEFI StorCLI should detect controller when UEFI driver is not present and when FW is in ready state
SCGCQ01506022 - Instance Validation Failed between "controller-flash-component-erase-schema.json" and "flasherase" JSON.
SCGCQ01506038 - Instance Validation Failed between schema and JSON output for many scenarios with one common error.
SCGCQ01506041 - Instance Validation Failed between "controller-termlog-schema.json" and "set termlog=off" JSON.
SCGCQ01506052 - Instance Validation Failed between "controller-profile-schema.json" and "show_profile" JSON.
SCGCQ01507421 - Readme file have no mention of PD and JBOD level command support.
SCGCQ01340874 - Validate the VPD size before programming the data
SCGCQ01451940 - Show command is not processed for IT firmware and IT complete flash images in big endian server
SCGCQ01465446 - Instance Validation Failed between "controller-linkconfig-schema.json" and "show linkconfig" json.
SCGCQ01470263 - Incorrect help description for erase and download completeflash commands
SCGCQ01470420 - Fixing coverity issues - Resource leaks and Illegal comparison
SCGCQ01471852 - Instance Validation Failed between "virtual-drive-config-schema.json" and "add vd " JSON
SCGCQ01472195 - Coverity libmods issues - Resource leaks and Wrong sizes
SCGCQ01472705 - Fixing coverity issues - Non array deletes,Resource leaks,and unchecked return codes
SCGCQ01472797 - Fixing coverity issue : Resource leaks
SCGCQ01472802 - Instance Validation Failed between "controller-jbod-schema.json" and "add jbod" JSON.
SCGCQ01472845 - Instance Validation Failed between "controller-patrolread-set-schema.json" and "/c0 set pr excludevd=1" JSON.
SCGCQ01473334 - Instance Validation Failed between "enclosure-drive-detailed-schema.json" and "/call/eall/sall show all" json.
SCGCQ01473344 - Instance Validation Failed between "drive-operations-patrolread-schema.json" and "/call/e65/sall show patrolread"
SCGCQ01480900 - No error description when start/stop locate fails on the drive from StoreLIBIT library
SCGCQ01480910 - Start/Stop locate on a invalid enclosure returns success
SCGCQ01480920 - StorCLI - /c0 show all - Capabilities for supported drives seen only SAS/SATA, NVMe not found
SCGCQ01483753 - IT command to set sasadd and other set operations shows success for an MR controller
SCGCQ01483760 - Detailed help contents were not present for most of the IT download options.
SCGCQ01003523 - SLT displays enclosure many fields information as "Unsupported", when we fire a command Get Enclosure Status
SCGCQ01456168 - Instance Validation Failed between "controller-cc-schema.json" and "show consistencycheck" JSON.
SCGCQ01478448 - Storcli show displays OS Version appended with Technical Preview
SCGCQ01479250 - Storcli display Operating System without space for Linux version
SCGCQ01202087 - Requesting user to enter the allocated response length of SMP request page

Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.







Component:
=========
SAS MegaRAID StorCLI
Release Date: 12/15/17


Version Numbers:	StorCLI
===============		===========
Current Version		007.0409.0000.0000		
Previous Version	007.0309.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ01436920 - (Closed) - Port linkspeed is displayed in a different JSON object for NVMe drives
SCGCQ01423458 - (Closed) - Storcli: Instance Validation Failed between "controller-profile-schema.json" and "show profile" JSON. 
SCGCQ01415875 - (Closed) - Not even or regular in pattern of drive order display in storcli 
SCGCQ01413239 - (Closed) - Storcli: Instance Validation Failed between "controller-properties-schema.json" and "show" json. 
SCGCQ01413017 - (Closed) - Storcli: Instance Validation Failed between "controller-sgpioforce-schema.json" and "set sgpioforce" JSON output. 
SCGCQ01413011 - (Closed) - Storclio and storclif dispays windows version wrong for Windows 10 OS
SCGCQ01412756 - (Closed) - Strocli: controller-shutdown-restart-schema.json is not in JSON format. 
SCGCQ01392511 - (Closed) - Pre-Alpha - Show all reports NVMe drive linkspeed as "UNKNOWN"
SCGCQ01388543 - (Closed) - Save and restore with spanned volumes is throwing an error array index invalid
SCGCQ01388177 - (Closed) - StorCli should display 128 byte inquiry for drives connected to IT controller including tape. 
SCGCQ01385430 - (Closed) - Fixing out of bounds in libmods
SCGCQ01385425 - (Closed) - storcli craches with drive show all command for some specific SATA drive
SCGCQ01385373 - (Closed) - Misleading message "Reboot" when erase or completeflash done in MR ventura
SCGCQ01384690 - (Closed) - storcli is giving error when issuing the command dall show mirror 
SCGCQ01384238 - (Closed) - Controller mode reported as "Undefined" in JBOD mode in show profile output 
SCGCQ01383816 - (Closed) - controller show all command is not listing the JBODs when controller is in JBOD personality
SCGCQ01355452 - (Closed) - EFIStorcli(1.21.12):Number of blocks in VD info is blank when queried for VD info from EFIStorcli. 
SCGCQ01423447 - (Closed) - Instance Validation Failed between "controller-detailed-properties-schema.json" and "show all" JSON output. 
SCGCQ01415355 - (Closed) - Instance Validation is failing for mentioned commands. 
SCGCQ01415208 - (Closed) - Storcli: Additional string displayed in "Show wbsupport" output. 
SCGCQ01414744 - (Closed) - This is a syntactical error where a comma was added. 
SCGCQ01413222 - (Closed) - Storcli: Instance Validation Failed between "controller-time-schema.json" and set time json. 
SCGCQ01412948 - (Closed) - Storcli: Instance Validation Failed between "controller-securitykey-schema.json" and "set securitykey" JSON output. 
SCGCQ01412764 - (Closed) - Storcli: Instance Validation Failed between "controller-eghs-schema.json" and "set eghs" JSON output. 
SCGCQ01404583 - (Closed) - LinkSpeed is unknown for PCIe devices under Port Information headline
SCGCQ01389922 - (Closed) - Battery Capacitance is displayed incorrectly across different applications. 
SCGCQ01388610 - (Closed) - Tape drive connected to MR controller should not take NVMe speeds in to consideration
SCGCQ01385377 - (Closed) - Fixing unchecked return values
SCGCQ01443435 - (Closed) - Adding excludevd option to the help file of patrolread command
SCGCQ01438214 - (Closed) - Updating pre-ventura SBR fails with "hwdevice" command
SCGCQ01430237 - (Closed) - Instance Validation Failed between "controller-ASO-schema.json" and "show ASO" json. 
SCGCQ01413261 - (Closed) - Strocli: controller-ASO-schema.json is not in JSON format. 
SCGCQ01412771 - (Closed) - Storcli: Instance Validation Failed between "controller-flushwriteverify-schema.json" and "set flushwriteverify" JSON output. 
SCGCQ01411534 - (Closed) - Storcli: Instance Validation Failed between " controller-termlog-schema" and "delete termlog" JSON output. 
SCGCQ01410438 - (Closed) - Storcli: Instance Validation Failed between "controller-events-schema" and "delete events" JSON output. 
SCGCQ01404219 - (Closed) - Storcli 07.403.00.00 is showing Linkdown for all Phys in c0/pall show command
SCGCQ01392046 - (Closed) - IIC mode string was used to append in case of error. I2C must be used
SCGCQ01412934 - (Closed) - Strocli: controller-HDD-SSD-thermalpollinterval-schema.json is not in JSON format. 
SCGCQ01412758 - (Closed) - Storcli: Instance Validation Failed between "controller-coercion-schema.json" and "set coercion" JSON output. 
SCGCQ01411544 - (Closed) - Removing the memory leaks in dequelog command
SCGCQ01421610 - (Closed) - StorCLI: Spindown help syntax is misleading
SCGCQ01419754 - (Closed) - Assign VDs suboption in cachecade VD creation is not assigning the intended VDs. 
SCGCQ01413263 - (Closed) - Storcli: Instance Validation Failed between "controller-bios-schema.json" and "show bios" JSON output. 
SCGCQ01413106 - (Closed) - Storcli: Instance Validation Failed between "controller-supportssdpatrolread-schema.json" and set supportssdpatrolread json. 
SCGCQ01389856 - (Closed) - Inconsistencies between the applications for manage link speed
SCGCQ01443683 - (Closed) - DriveID and errormsg are coming improper on drive POH command when failed
SCGCQ01413255 - (Closed) - Strocli: controller-detailed-properties-schema.json is not in JSON format. 
SCGCQ01412748 - (Closed) - Strocli: controller-config-schema.json is not in JSON format. 
SCGCQ01389891 - (Closed) - Correcting yacc rule for bbus show gasguage data command
SCGCQ01423452 - (Closed) - Storcli: Instance Validation Failed between "controller-flushwriteverify-schema.json" and "show flushwriteverify" JSON. 
SCGCQ01413018 - (Closed) - Storcli: Instance Validation Failed between "controller-smartpollinterval-schema.json" and "set smartpollinterval" json. 
SCGCQ01412943 - (Closed) - Storcli: Instance Validation Failed between "controller-personality-schema.json" and "set_personality" JSON output. 
SCGCQ01389890 - (Closed) - Correcting yacc rule of slaveaddress for command hwdevice
SCGCQ01414749 - (Closed) - Instance Validation Failed between "controller-freespace-schema.json" and "show freespace" JSON output. 
SCGCQ01412938 - (Closed) - Storcli: Instance Validation Failed between "controller-perfmode-values-schema.json" and "set perfmode" JSON output. 
SCGCQ01389451 - (Closed) - Removing the NMR command for setting SCAPVPD
SCGCQ01373354 - (Closed) - RPM -verify report error after installing storcli RPM package for linux
SCGCQ01368469 - (Closed) - Adding the JBOD personality with EPD passthrough support 
SCGCQ01368465 - (Closed) - Added the support for EPD-PT creation and operations on a EPD-PT. 
SCGCQ01396733 - (Implemented) - always print StorCLI version information at beginning/top of output 
SCGCQ01353429 - (Closed) - New command in CLI OEM mode to select either PCIE or I2C as an out of band transport 
SCGCQ01445628 - (Implemented) - Profile Management: Storcli - Add support for WB bit in profile management show
SCGCQ01417390 - (Port_Complete) - StorCLI firmware download to multiple target devices fails to every other device

Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.










Component:
=========
SAS MegaRAID StorCLI
Release Date: 09/29/17


Version Numbers:	StorCLI
===============		===========
Current Version		007.0309.0000.0000		
Previous Version	007.0205.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ01311728 - PH4 StorCLI FW download failed on Linux/Windows OS platforms
SCGCQ01311846 - Erase [excludemfg] file=<> command hangs when executed on non-op/jumpered/OCR disabled operational controllers
SCGCQ01319395 - Fixing Error Handling issues and Resource leak
SCGCQ01320336 - Fix for Libmod files having potential loop errors
SCGCQ01364604 - Factory command is deducting the remanfacturing license even for the first time manufacturing .
SCGCQ01300897 - VD is deleted after discarding preserved cache with CLI. 
SCGCQ01319405 - Unified StorCLI 7.3 : Fixing resource leaks - Part 1
SCGCQ01321477 - StorCLI - show command prints wrong information in OEL6.8
SCGCQ01324749 - Non-operational state of FW when EFI driver is absent causing segmentation fault.
SCGCQ01333085 - CLI reports failure when issuie DPM commands
SCGCQ01346041 - StorCLI - Indentation errors observed in output while programming invalid length VPD file
SCGCQ01352149 - StorCLI Device Interface Information field doesn't reflect inteface of actual device attached to a controller
SCGCQ01321460 - StorCLI - Show command thorws error "failed to get information from host" in APM (ARM) CentOS
SCGCQ01359018 - Unified StorCLI 7.3 : Validate data to be read for controller recovery commands
SCGCQ01312757 - PH4 StorCLI - Segmentation fault observed with show command when connected in FreeBSD11.0
SCGCQ01319407 - Unified LibMods 7.3 : Fixing resource leaks and missing return statments - Part 2
SCGCQ01348042 - Changing of PatrolRead Excludevd property from cli
SCGCQ01373639 - CLI is not showing Insight Drives with correct Enclosure/Chassis position
SCGCQ01304875 - Fixing Out of Bounds access and Resource leak
SCGCQ01378900 - Snapshot is Enabled error when deleting VDs. 
SCGCQ01295289 - storclif64 can not create prl11 across 2 enclosure using 32 pds
SCGCQ01340557 - StorCLI crashes when VPD file with VPD_Length 0 is tried to update.
SGCQ01346308  - List pending profile details of the controller 
SCGCQ01283646 - Add ability to field upgrade CPLD on HBA boards
SCGCQ01389395 - Tape drive connected to MR controller should not take NVMe speeds in to consideration
SCGCQ01332915 - Global Hot Spares shows as TR in storcli DG query when TR is activated on DG
SCGCQ01332859 - Correcting error messages for transport errors. 
SCGCQ01332851 - Storcli needs to be fixed for maximum TR info in ctrl show all 
SCGCQ01320515 - Storclif64 does not return non zero error code on failure
SCGCQ01318368 - PPC : StorCLi throws error while loading the saved configuration. 
SCGCQ01318326 - Need to handle FW return code change for profile management success case
SCGCQ01392548 - Storcli shows CV as optimal When Predictive Failure Bit is set 
SCGCQ01332806 - With spun down PDs and primary path broken, FW does not allow creation of VDs. 
SCGCQ01345297 - StorCLI displays "Next Learn Time" incorrectly
SCGCQ01332916 - Factory settings changes for Transport as per new MFC_DEFAULTS in API. 
SCGCQ01309547 - CLI to maintain consistency in the properties/attributes including case between MR and IT. 
SCGCQ01305204 - The command "Storcli /c0/vall del" its deleting the VDs along with EPDs as well 
SCGCQ01391817 - Custom CLI forOEM Solutions group
SCGCQ01388560 - StorCli should display 128 byte inquiry for drives connected to controller including tape. 
SCGCQ01358889 - Trying to Create Logical disks with UBAD drives gives wrong Failure Message from Storcli. 
SCGCQ01332905 - Storcli fails with segmentation fault (core dumped) with foreign import 
SCGCQ01324969 - Segmentation Fault observed when tried to delete a SWR VD from Version (Max5): 3.1(0.102) 
SCGCQ01391827 - Libmod Changes:Custom CLI for OEM Solutions group
SCGCQ01386881 - storcli craches with drive show all command for some specific SATA drive
SCGCQ01332907 - Transport command is including all when only shared is requested, where it should be failed
SCGCQ01332872 - Storcli fails with segmentation fault (core dumped) with foreign import 
SCGCQ01332850 - Storcli SegFault -HUU update utility doesn't detect if Foreign Config PD exist


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.broadcom.com.









Component:
=========
SAS MegaRAID StorCLI
Release Date: 06/30/17


Version Numbers:	StorCLI
===============		===========
Current Version		007.0205.0000.0000		
Previous Version	007.0166.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ01332803 -- With spun down PDs and primary path broken, FW does not allow creation of VDs (Port Of Defect SCGCQ01035520)
SCGCQ01196715 -- PPC Support(Big endian and Little endian) to Unified StorCLI
SCGCQ01274715 -- StorCLIO states wrong OS version for Windows 2016
SCGCQ01275687 -- When invalid enclsoure is specified as user input , the output is not correct
SCGCQ01276688 -- IT show all command displays Physical Drive Information headline wihtout table when no drive is connected
SCGCQ01280682 -- Validation of firmware fails in PPC Big Endian
SCGCQ01280928 -- Unified StorCLI 7.2:Windows only:Drive properties headline gets truncated during drive show all command
SCGCQ01281191 -- StorCLI - Unable flash bios image, taken from /c0 get bios command
SCGCQ01282376 -- pall compare shows the current linkspeed on MR controllers
SCGCQ01281186 -- StorCLI show all command failed with segmentation fault in PPC server
SCGCQ01282051 -- StorCLI get nvdata crashes with segmentation fault
SCGCQ01273381 -- StorCLi throws error while loading the saved configuration.
SCGCQ01290216 -- Second OCR request not getting triggered, fired when first OCR request about to finish, but O/P shows success.
SCGCQ01307320 -- Need to handle FW return code change for profile management success case



Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.avagotech.com.













Component:
=========
SAS MegaRAID StorCLI
Release Date: 06/16/17


Version Numbers:	StorCLI
===============		===========			
Current Version		7.0166.0000.0000


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
FreeBSD
EFI 
Ubuntu

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
Initial Release


Installation Commands: 
=======================
Any OS specific instructions are noted in a readme file included in a folder in the zip file.

Refer to the MegaRAID SAS Software User's Guide for any additional StorCLI information.  The User Guide can be found in the MegaRAID Documentation section of www.avagotech.com.
